Page 1 of 1
IH C2 MOWER PARTS SOURCE
Posted: Mon Feb 17, 2014 1:47 pm
by sford
I am in need of replacing the Bronze Bushing in the drive pulley of my IH C2 mower part #2628 and clutch pin and spring parts # 2826 and 2827. Does any body know of a source for these items. And many thanks to all who make this forum work.
Re: IH C2 MOWER PARTS SOURCE
Posted: Mon Feb 17, 2014 2:11 pm
by Bob McCarty
Messick's shows the pin and spring available on their diagram, but the part #'s are completely different from what you have listed (?). I'm not sure about the bushing from the info you have listed.
Bob
Re: IH C2 MOWER PARTS SOURCE
Posted: Mon Feb 17, 2014 9:30 pm
by sford
Thanks, they have what I am looking for. Different part numbers for the old drawings, but still the correct part.
Re: IH C2 MOWER PARTS SOURCE
Posted: Tue Feb 18, 2014 9:25 am
by Buzzard Wing
Be careful pressing it in. You will need to drill a hole in the new one where it lines up with the grease fitting.