Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
11 posts • Page 1 of 1
where is a good place to get a replacement amp gauge for a 57 cub? thanks
I would try T M one of the forum sponsors , they are fine folks with good service . If they don' t have them then Steiner.com
Will be a source.
I started out with nothing and now I only have half of that left !
i checked tm's site , they don't seem to stock them anymore. i'll check again, maybe i overlooked them.would someone post a pic of what they look like for a 57. thanks
Our tractor supply store has a wall full of farmall cub parts. I don't know if they have them in your area. I got a voltage regulator from them yesterday $47. They had all the gauges in stock on the wall. Cheaper then the IH dealer and if you get the wrong part it's your fault for not reading the label.
IN GOD WE TRUST
All others pay cash
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
8th Va fest link viewtopic.php?f=8&t=81392&p=657790#p657790
If you have a Carquest auto parts store in your area they sell an ammeter that is very similar, if you still have a generator, be sure NOT to get the 60amp one, or you will not be able to tell if it is charging.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
Rob, I got a nice USA (CT no less) made one from Steiner. My mistake was getting 60 amp, so it hardly moves on a 12v Cub. They have IH labeled ones for twice the money, but a 20 or 30A one is only $12.25
http://antique-tractor-parts.steinertra ... eter&view=
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
Thanks for the suggestion about the insulation of the terminals from the bracket as a short may cause ammeter to not read. That may be what is wrong with my Ford tractor so I need to check it.
Stevenstractor.com in Louisiana usually carries the along with other cub parts.
Guiena, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub.
I've dealt with a local gentleman to us in Coventry Ct. who sells gauges. I've purchased a few and have been very happy with them.
eBay item number:221211821776
11 posts • Page 1 of 1
Who is online