Page 1 of 1

Governor Control Rod Bracket on Head

Posted: Wed Oct 02, 2013 3:12 pm
by PVF1799
There is a little sheet metal bracket that I've seen on the cylinder head that the governor control lever runs through. There is a remnant of it on my control lever, but not the part that attaches to the head. I don't see that part in the TC-37-A. TM Tractor doesn't have them listed under engine or governor. Any suggestions?

Ken

Re: Governor Control Rod Bracket on Head

Posted: Wed Oct 02, 2013 3:36 pm
by Don McCombs
Use one of your 100 cable clips.

Image
Photo courtesy TM Tractor Parts.

Re: Governor Control Rod Bracket on Head

Posted: Wed Oct 02, 2013 3:38 pm
by pickerandsinger
You probably already know, the gov works a lot better when the rod runs thru it....Did you try JP Salvage..Just a thought or maybe Tim...Oops I guess Don had the answer....

Re: Governor Control Rod Bracket on Head

Posted: Thu Oct 03, 2013 8:35 am
by PVF1799
JP Tractor had one and I ordered it. Don, I could not bring myself to use one of the 100 clips I bought - I may run out :D

Re: Governor Control Rod Bracket on Head

Posted: Thu Oct 03, 2013 8:52 am
by John *.?-!.* cub owner
351009R1, page 29 of the TC37A manual (shown with hand throttle and rod).

Re: Governor Control Rod Bracket on Head

Posted: Thu Oct 03, 2013 10:02 am
by PVF1799
John *.?-!.* cub owner wrote:351009R1, page 29 of the TC37A manual (shown with hand throttle and rod).


I check and check what I believe to be logical places and always someone with more experience finds it. Thanks John....The learning curve continues! :D

Re: Governor Control Rod Bracket on Head

Posted: Thu Oct 03, 2013 10:50 am
by Barnyard
PVF1799 wrote:
John *.?-!.* cub owner wrote:351009R1, page 29 of the TC37A manual (shown with hand throttle and rod).


I check and check what I believe to be logical places and always someone with more experience finds it. Thanks John....The learning curve continues! :D

Ken, here is a page I use a lot of times. I broke it down by the individual component and somethings are duplicated to make it easier such as brakes are listed under both "brakes" and "pedals".

http://savethecub.com/manuals/cub_parts_manual.htm