Touch Control Missing Screen

I started rebuilding the touch control cylinder block assembly this weekend. The block casting no. is 354383R1. After removing the Relief valve I noticed the screen was missing. Any ideas on the source for a replacement? From the photos in the service and parts manual it looks like the small strainer screen in the Cub carburetor inlet.

One of our site sponsors, TM Tractor Parts, has it. See link below.



http://www.tmtractor.com/new/hy/517-1fp.htm

One of our site sponsors, TM Tractor Parts, has it.

Actually, TM no longer carries that screen. You may be at the dealer's mercy.

Oops. Sorry about that. Guess I failed to read the text on the website.

I believe he is talking about the small relief valve screen, I think it is still available from Case/IH
If not I may have a used one
Boss

I believe he is talking about the small relief valve screen, I think it is still available from Case/IH
If not I may have a used one
Boss

That's the one, Boss. I'll call the dealer and ask about it. I looked in the local dealer's parts catalogue and didn't see it listed, but I know they carry some stuff that's not advertised in the catalogue. Thanks,

Bill, It took me a minute to find it in the parts diagram, looks like part # 354269 R1, called a sieve for the relief valve.

Bob

Bill, It took me a minute to find it in the parts diagram, looks like part # 354269 R1, called a sieve for the relief valve.

Bob

Yes, that's the part #. Called IH Dealer and they have it for $3.57. I'll probably spend about $7 in gasoline to pick it up, but I need some Hy-Tran anyway, so problem solved. Thanks everyone.