Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
6 posts • Page 1 of 1
I have three discharge nozzles here that you are looking at. The arrows are pointing at the holes on each one. The one on the right came off a 47. No hole in the end. The other two I have know idea what year. The parts book does show different numbers but states they will all work. Just sharing what I have found.
I don't know my right from my left. sorry
They need to match the high speed jet. There are several different jet openings, too. Bob McCarty has the measurements, of the openings.
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
Now that sounds interesting! Been cleaning two carburetors with parts of a third carburetors. I know the jet that came with the 47 is shot. So I will have a 50-50 chance when I put them back together they match.
This is information that Bob McCarty posted earlier. I'm sure that he will be along shortly to interpret it.
Jets For IH Carb
251234R94 364579R91 405004R91 63349C91
Discharge 52 39 39 39
Mainjet 0.032 0.034 0.040 0.040
Bleed 57 53
Idle Jet 75 75 75 75
Edit: Boy, the information sure didn't look like it does on the post, when I previewed it. Bob has the good stuff.
Last edited by Bill Hudson on Sun Sep 29, 2013 6:51 pm, edited 2 times in total.
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
That data is all from the GSS-1411 manual with the specs for a later carb added. The aftermarket kits don't have the correct size jets, and I'm sure a lot of parts get mixed up. To be absolutely correct, I think you'd need to measure the size of the bleed and then match the discharge nozzle and main jet to it. I'm not sure that on an older/used Cub that it makes that much difference.
"We don't need to think more,
we need to think differently."
The discharge tube with no hole in the end goes with the main jet that looks like it has a huge hole in the end. It won't work with any of the other main jets.
6 posts • Page 1 of 1
Who is online
Users browsing this forum: hschwartz3 and 4 guests