22 sickle blade bars

Thu Sep 26, 2013 3:04 pm

cutter.jpg


cutter2.jpg


cutter3.jpg


I received 3 bars with a 22 mower, and all 3 appear slightly different. For example, the bottom one has a lot thicker guide and it is a different shape. The knob has a hole in it instead of a groove.

All 3 are for a 4 foot mower. Will all 3 work in a 22 sickle 4 foot mower?

Thank you,

Todd
You do not have the required permissions to view the files attached to this post.

Re: 22 sickle blade bars

Thu Sep 26, 2013 3:17 pm

What are the numbers on the head? MA-999 and MC-139 will work. I think MB-139 and MA-139 work. I think there was a M139 that does not. Bottom line is it either fits underneath the first hold down when installed or does not. The hole vs. groove on the ball does not make a difference. --Lee

Re: 22 sickle blade bars

Thu Sep 26, 2013 6:26 pm

If they are 4 foot they will not work. 22 mowers come in 4 1/2 and 5 foot.

Re: 22 sickle blade bars

Sat Sep 28, 2013 1:31 pm

My 22is also 4.5 foot bar----my old one was 4 foot and great , 4.5 is too long for cub!

You. Can cut the long bars to shorter length and then they work great! Thanks ; sonny

Re: 22 sickle blade bars

Sat Sep 28, 2013 6:10 pm

I want to clarify the length. The total length of the bars pictured is 58.75 inches. They are for a 4.5 foot mower, not the 5 foot mower.

Todd