My rear rockshaft bar rubs against my left fender when it's operating and my depth lever for the 193 plow rubs against the outside edge of the right fender when moved.
Apart from bending the fenders (or offenders, in this case), do you have any advice for creating more clearance between each?
Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Fenders in the Way
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Fenders in the Way
You either have to form the fenders or the rod to make the clearance. Your fenders may be bent in a bit too far or the rod has been bent at sometime in it's life.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 1068
- Joined: Sat Dec 10, 2005 4:31 pm
- Zip Code: 66839
- Circle of Safety: Y
- Location: KS. Burlington
Re: Fenders in the Way
Either bend in or bend out to make work without rubbing.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Fenders in the Way
Is your rockshaft standard or a converted rockshaft. The converted one is a closer fit to the fender. As has been stated, make sure the rod does not have a sideways bow to it. As to the depth control, most of them rub unless either the lever is bent to ward the tire some or the fender is bent inward some.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Fenders in the Way
John *.?-!.* cub owner wrote:Is your rockshaft standard or a converted rockshaft. The converted one is a closer fit to the fender. As has been stated, make sure the rod does not have a sideways bow to it. As to the depth control, most of them rub unless either the lever is bent to ward the tire some or the fender is bent inward some.
My rockshaft used to be manual, lift spring-assist, now cut/converted to be used with a T/C unit. The rod itself has the offset "kink" in it.
The rod is pretty stout, so probably will have to bend the fender away from the rockshaft. Ditto on bending the fender away from the depth lever. Of course, those fenders are like me---they resist change.
Thanks for replying with your opinions.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Fenders in the Way
Bring it to cubarama, we will give you all kinds of advice about it.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Fenders in the Way
John *.?-!.* cub owner wrote:Bring it to cubarama, we will give you all kinds of advice about it.
I'll bring my big hammer. We'll have that fender moved out of the way before they draw for the first door prize.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 3428
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Fenders in the Way
On the depth lever rubbing: some folks operate their plows with tires set at less than 40 inches. Depth lever will rub against tires. Then the lever usually gets bent away from tire toward fender. Make sure your width is at 40 and bend lever away from fender. That is assuming your fender is in correct order
Thomas
Who is online
Users browsing this forum: No registered users and 1 guest