Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Not in my experience. That suggests to me that the clutch fingers are not all at the same height.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Not really normal. Sounds like one of your clutch fingers is out of adjustment and rubbing on your TO bearing.
Mike (Happy as a Lark in Allison Park, PA)
Check out my Restoration Thread (1955 Cub, Lewis)
In addition to what has been said, the TOB should not touch the fingers until one inch of free play has been taken out by pushing the pedal forward. There is a spring under the floorboard that holds the pedal up and also hold the TOB off the fingers an 1/8" if everything is adjusted correctly. If the spring is broken, it'll alow the pedal to fall forward and contact the fingers, which will cause the pedal to "bounce" a bit as the engine spins.
I have a 48 cub with about 500 hrs total running time. all original,, gears are very quiet.. Some noise in a cub that has a lot of hours on it is ok. but when you feel the noise in the seat means excessive wear. Also who knows what the previous owners done to them inside over the years.
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
Who is online
Users browsing this forum: No registered users and 5 guests