Thu Aug 01, 2013 8:31 am
169Cub wrote:[How do those lines come off? I was reading and it looks like they pop off the pump housing.
169Cub wrote:It is a 40x60 building with a 20x40 fully enclosed, heated, insulated shop that I am also going to have a smaller man cave in, plus a small woodshop in there. The tractors will have to move out into the shed when larger wood projects are being worked, but none the less, it is awesome. It is far from clean though! I have many hours organizing and hanging peg board, installing extra work benches, etc. And I still have many hours to go. It is hard going through things and deciding what to keep and what to "scrap". Anyone need a really nice 60 gallon Craftsman air compressor with some air tools?
Thu Aug 01, 2013 6:19 pm
Fri Aug 02, 2013 7:45 am
Fri Aug 02, 2013 8:06 am
Fri Aug 02, 2013 8:17 am
169Cub wrote:I am having a difficult time finding a rebuild kit or just parts to rebuild it.
Case/IH dealership or New Holland dealership. At New Holland you will need the IH part numbers for the kit or parts wanted.Bob McCarty wrote:TM Tractor still carries kits for both the pump and the block: http://www.tmtractor.com/new/hy/hy_001newparts.htm If you are rebuilding the block, there are two different kits, so you'll need the part # off of yours.
Sun Aug 18, 2013 2:23 pm
Sun Aug 18, 2013 4:28 pm
169Cub wrote:...The parts that I need are:
1 tension spring
Check valve x2
I noticed that the strainer is like $60 bucks. Is there anyplace that I can get this for cheaper? ...