Brake Pedal Bushings
Posted: Tue Jul 30, 2013 10:30 am
These bushings got all bent up getting the brake rods out. I found the puller on this forum after I jigged the whole platform in the press. Anyways - the brake rods now work freely and things are back in line. Heat and careful jig preparation so it bent in the right spot did the trick. Sorry no before pick....was in too much of rush to fix it I guess.
- Straight and working_1
- IMG_2382 (800x600).jpg (250.07 KiB) Viewed 137 times
- Straight ad working_2
- IMG_2383 (600x800).jpg (247.34 KiB) Viewed 137 times