This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Breaking the bead on front tier
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Breaking the bead on front tier
Well, along with the broke tie rod, my right front tire sprang a leak. Tried the jack under a solid objec trick, but the object wasn't solid enough. Then I noticed the parallel carpenter'd clamp hanging from the rafters. Yep, screwed in the inner rod, screwed out the outer rod to pinch the jaws, then used a BFS (screwdriver) to pry the bead loose. Hope this helps someone down the road.
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
-
- Team Cub
- Posts: 24282
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Breaking the bead on front tier
I have found a BFV (vise) to be handy also.
CI CubFest
Photo by Doug (1541) Miller
CI CubFest
Photo by Doug (1541) Miller
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Breaking the bead on front tier
I've used a hydraulic wood splitter, more than once. Stick a piece of wood, across the wedge, and stand the tire between the block, and pusher. Ed
-
- 10+ Years
- Posts: 836
- Joined: Sun Aug 14, 2005 11:14 am
- Zip Code: 16353
- Tractors Owned: 1955 Farmall Cub
1955 International 300 Utility
2018 JD loader/ backhoe - Circle of Safety: Y
- Location: Tionesta, PA.
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Breaking the bead on front tier
If you have multiple cubs, lay the rim on a solid surface, drive other cub front tire over flat tire till bead breaks.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Breaking the bead on front tier
I have one of these mini-changers, along with a set of 15 inch spoons that work well.
http://www.harborfreight.com/catalogsea ... re+changer
http://www.northerntool.com/shop/tools/ ... 4318_14318
http://www.harborfreight.com/catalogsea ... re+changer
http://www.northerntool.com/shop/tools/ ... 4318_14318
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 5
- Joined: Tue Apr 15, 2008 3:02 pm
- Zip Code: 14127
- Location: NY, Orchard Park
Re: Breaking the bead on front tier
Ditto to what John said. I was using my mini-changer yesterday, and it makes breaking the beads a simple task. Now all I have to do is clean & paint the rims, and put the new front tires on the rims without pinching the tubes.
-
- 10+ Years
- Posts: 756
- Joined: Wed Jun 23, 2004 8:19 am
- Zip Code: 02346
- Tractors Owned: 1959 Cub lo-boy
1950 super A - Location: Middleboro MA usa
Re: Breaking the bead on front tier
I have been waiting for a post like this to share a method that I learnt about 40 years ago but the method will make some nerves. When I was seven we moved next door to a family run truck tire business that I spent most of my free time and helping and working around the shop when I was about 10 years old to in my early twenties. The father (who became a farther to me) had been working in the truck tire business for many years and had worked for some big tire company’s when he was a young man. This guy knew tires inside and out.
This magic method had been used by and the company’s that he worked for many years and I have used it myself for many years without incident. The method to break tire beads without broken your back is gasoline. This guy had bleach bottles that he would fill up and carry with him. He would pour a little bit of gasoline in the bead between the tire and the rim and let it sit for 10 or 15 minutes or so and stand on the tire and hit the bead with a big FTH (TH = tire hammer) and the tire would fall off with little effort. I have never had a dangerous experience (nor the tire company that I worked for) but that does not mean it is safe. I wonder if there is not a liquid that would do that same job without being flammable.
Now I would like to save the safety minded (we all should be safety minded) time by stating that
GASOLINE IS EXTREMLY VOLATILE AND FLAMABLE AND SHOULD NEVER BE USED IN THE METHORD THAT I DISGRIBED ABOVE. Gasoline should never be stored in non GASOLIN APROVED CONTAINERS.
The above statement was for written for entertainment purposes only
This magic method had been used by and the company’s that he worked for many years and I have used it myself for many years without incident. The method to break tire beads without broken your back is gasoline. This guy had bleach bottles that he would fill up and carry with him. He would pour a little bit of gasoline in the bead between the tire and the rim and let it sit for 10 or 15 minutes or so and stand on the tire and hit the bead with a big FTH (TH = tire hammer) and the tire would fall off with little effort. I have never had a dangerous experience (nor the tire company that I worked for) but that does not mean it is safe. I wonder if there is not a liquid that would do that same job without being flammable.
Now I would like to save the safety minded (we all should be safety minded) time by stating that
GASOLINE IS EXTREMLY VOLATILE AND FLAMABLE AND SHOULD NEVER BE USED IN THE METHORD THAT I DISGRIBED ABOVE. Gasoline should never be stored in non GASOLIN APROVED CONTAINERS.
The above statement was for written for entertainment purposes only
Bacon makes everything better.
1959 LO-Boy 1950 Super A
1959 LO-Boy 1950 Super A
-
- Cub Pro
- Posts: 7511
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Breaking the bead on front tier
Bob, a guy could get a big BANG,out of it! Ed
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Breaking the bead on front tier
Spaceghost, I have seen the same thing done, but after it set 4 or 5 minutes they would light the gasoline and let it burn off before removing the tire. they only used a very small trickle of gasoline around the bead, and the flame was small enough it was easily put out with a rag if needed.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
Re: Breaking the bead on front tier
I have made several attempts to remove a rear tire from a really rusted rim and have put a plank on the tire and driven a truck up on the plank. Same tire, I have tried to get prybars in between what was left of the bead edge on the rim, and the tire is still mounted to the damaged rim.
Any suggestions to remove the rear tire bead? I had thought of using my angle grinder with a metal cutting wheel to cut the rim in half, but if there is something easier for this beast, I would really love to hear!! The tire is in great shape, but is useless to me without being able to get it off the rim!
Any suggestions to remove the rear tire bead? I had thought of using my angle grinder with a metal cutting wheel to cut the rim in half, but if there is something easier for this beast, I would really love to hear!! The tire is in great shape, but is useless to me without being able to get it off the rim!
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Breaking the bead on front tier
Two, three or more, flat pry bars, spray bottle of soapy water and hefty hammer. Drive one flat pry bar between rim and tire until pry bar hits the bead bottom. 2nd flat pry bar, move over so you have an inch or two gap between the two bars - same thing. Spray soapy water in gap between flat pry bars. Try twisting the pry bars side ways.Hengy wrote:I have made several attempts to remove a rear tire from a really rusted rim. Any suggestions to remove the rear tire bead?
Continue working your way around the rim. Go around again opening up the gap between bead and rim.
If the rim is rusted to the bead, your not gonna need the daily gym work out. You will eventually get the tire off the rim.
I have an excuse. CRS.
-
- Cub Pro
- Posts: 5762
- Joined: Mon Jul 30, 2007 11:48 am
- Zip Code: 32460
- eBay ID: noles1432460
- Circle of Safety: Y
- Location: FL, Sneads
Re: Breaking the bead on front tier
Mike,
I have found this is another good use for Kroil (or your favorite brand). Spray generously around the tire before you start, and then as the space opens up from the pry bars.
I have found this is another good use for Kroil (or your favorite brand). Spray generously around the tire before you start, and then as the space opens up from the pry bars.
In the middle of every difficulty lies opportunity. - Albert Einstein
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
.
Roy Edenfield
Deep South CubFest #10
February 14 & 15, 2020
-
- Team Cub
- Posts: 24282
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Breaking the bead on front tier
Hengy wrote:Any suggestions to remove the rear tire bead?
Bring it to the Tug and I'll put my bead breaker on it.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
Re: Breaking the bead on front tier
Barnyard wrote:Hengy wrote:Any suggestions to remove the rear tire bead?
Bring it to the Tug and I'll put my bead breaker on it.
Thanks for that offer, Bill. Unfortunately with the move and all the new projects around the new house, the Tug isn't in the cards for me!
Thanks everyone for your suggestions...I'll get after it sometime soon!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 362
-
by bkvsr
Tue May 25, 2021 3:10 pm
-
- 13
- 624
-
by Clemsonfor
Thu Feb 24, 2022 6:17 pm
-
- 4
- 305
-
by Mht
Thu Sep 02, 2021 3:26 pm
-
- 3
- 354
-
by inairam
Sat Mar 30, 2024 11:32 am
-
- 16
- 306
-
by cdahl383
Wed May 03, 2023 4:04 pm
Who is online
Users browsing this forum: Jim Becker, Majestic-12 [Bot], WildFarmall and 3 guests