Don't know, but I've been told
Posted: Mon Jul 15, 2013 1:03 pm
Is it correct that the cultivator for an "A" is the same as the Cub cultivator?? Dusty B
Farmall Cub
The "International" House of Cubs (est. 5/10/1999)
https://farmallcub.com/phpBB2/
Don't know, but I've been told
Page 1 of 1
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 3:19 pm
I believe the answer is NO. Some parts interchange, but the min framework is different. Ed
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 4:17 pm
I don't believe anything is interchangeable with a Cub and an "A".
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 5:05 pm
RaymondDurban wrote:I don't believe anything is interchangeable with a Cub and an "A".
Maybe the shanks, that is all
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 7:40 pm
Boss Hog wrote:RaymondDurban wrote:I don't believe anything is interchangeable with a Cub and an "A".
Maybe the shanks, that is all
I have both a Cub and an A, and their respective cultivators.
Other than the parts that meet the dirt, nothing else interchanges.
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 8:15 pm
that be the shanks ;D
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 8:19 pm
I was quite sure some parts would fit. Boss, do you think it might be the shanks? Ed
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 9:28 pm
Yes Ed It might be the shanks 
Re: Don't know, but I've been told
Posted: Mon Jul 15, 2013 9:34 pm
Thanks, guys! I didn't really think that there would be much compatibility between the two. Dusty B
Re: Don't know, but I've been told
Posted: Tue Jul 16, 2013 4:20 am
Cept for the shanks
Re: Don't know, but I've been told
Posted: Fri Jul 19, 2013 11:15 pm
Trying not to sound like Cliff on "Cheers:"
The Farmall A cultivators were a very different animal if you're used to Cub 144 or A-144 (Super A, 100, 130, 140) cultivators, (other than the shanks, etc.)
IH did make an adaptor kit to use the A-144 cultivators on a straight, not Super A. Looks like they just used the regular rear section from an A, and then some pressure rods running from the hand lift rockshaft that mounts under the gas tank, to the universal mounting frame. You sort of have to use your imagination because it does not show the parts assembled on the tractor.
Please don't confuse a "straight" Farmall A with a Super A. They look the same at a distance but they are very different critters. I have a nice back half of an early A, and nothing much will swap onto any of my Super A projects, and be anywhere near correct.
Al
The Farmall A cultivators were a very different animal if you're used to Cub 144 or A-144 (Super A, 100, 130, 140) cultivators, (other than the shanks, etc.)
IH did make an adaptor kit to use the A-144 cultivators on a straight, not Super A. Looks like they just used the regular rear section from an A, and then some pressure rods running from the hand lift rockshaft that mounts under the gas tank, to the universal mounting frame. You sort of have to use your imagination because it does not show the parts assembled on the tractor.Please don't confuse a "straight" Farmall A with a Super A. They look the same at a distance but they are very different critters. I have a nice back half of an early A, and nothing much will swap onto any of my Super A projects, and be anywhere near correct.
Al