[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - IH danco c-3

IH danco c-3

Mon Jun 24, 2013 9:46 am

I have this mower and the blade that is attached to the middle spindle broke off. Where can I find a spindle? I live in the Kansas City area.

Re: IH danco c-3

Mon Jun 24, 2013 9:59 am

P/n 474152R92 shows available new from CaseIH for about $180. If you have the parts, they can usually be welded back together. If it were me, I would post a parts wanted ad here http://www.farmallcub.com/phpBB2/viewforum.php?f=29 for the whole assembly.

Re: IH danco c-3

Mon Jun 24, 2013 10:02 am


G'day to you :D

The C-3 Rotary Mower 12-20-63 might be of some help. Messick's shows parts are available - Danco C-3.

You may wish to spend a little time reading the material in the links below:

Image to Farmallcub.com :big smile: Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to :arrow: the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.

Re: IH danco c-3

Mon Jun 24, 2013 10:16 am

Rudi wrote:Messick's shows parts are available - Danco C-3.

Unfortunately, the online parts catalog is goofed up. One of the pages for the C-3 mower is listed with the C-2 mower http://www.messicks.com/CAS/59229.aspx. You will find the C-3 spindle breakout at this location on the left at the bottom by selecting "(G-48) - PLATFORM, SPINDLES & GUIDE WHEELS". It has been this way as long as I have been looking at C-3 parts (not just on the Messick's site).

Re: IH danco c-3

Mon Jun 24, 2013 10:26 am


Thanks for the clarification on the Parts List. I have found Messick's can be messed up at times. For the longest while if I tried to get Cub parts diagrams it kept taking me to the much larger tractors.

Re: IH danco c-3

Mon Jun 24, 2013 4:43 pm

I have good used spindle assembly if you are interested