Besides a good surface prep, can anybody lend some advice in regards to proper gasket replacement on the touch control. I am ready to install the head gasket and the bottom cover gasket. Do they go on dry or should I use a gasket sealer?
Thanks in advance.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Advice for Gasket Replacement?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Bigschuss
- 10+ Years
- Posts: 445
- Joined: Wed May 14, 2003 7:08 pm
- Zip Code: 01256
- Tractors Owned: 1984 JD 990
1953 JD 40S
1973 JD 300 Snowmobile - Location: Savoy, MA
Advice for Gasket Replacement?
I wish coke was still cola, and a joint was a bad place to be...
- Merle Haggard
- Merle Haggard