Ready for things to get fit!!
Posted: Mon Apr 22, 2013 1:10 pm
Thought you guys might like to see my rear mounted corn planter that I'm hoping to use if/when things finally dry out here in northern Indiana.
This was originally a 3 point mounted 2 row planter. I unbolted the square tubing from the 3 point toolbar, removed one of the row units, and put a couple 1-1/4" holes through it, and now it'll mount to my rear cultivator arms, by just dropping the 1-1/4" pins through the bar into my cultivator clamps.
If I ever want to go back to the 3 point version, I just clamp the rectangle bar back to the 3 point tool bar.
The cub raises and lowers it with no troubles and the height seemed to work out just right.
Plus I think it'll make a right smart tool bar that something else could be mounted to, if the need arises.
This was originally a 3 point mounted 2 row planter. I unbolted the square tubing from the 3 point toolbar, removed one of the row units, and put a couple 1-1/4" holes through it, and now it'll mount to my rear cultivator arms, by just dropping the 1-1/4" pins through the bar into my cultivator clamps.
If I ever want to go back to the 3 point version, I just clamp the rectangle bar back to the 3 point tool bar.
The cub raises and lowers it with no troubles and the height seemed to work out just right.
Plus I think it'll make a right smart tool bar that something else could be mounted to, if the need arises.