Ready for things to get fit!!

Mon Apr 22, 2013 1:10 pm

Thought you guys might like to see my rear mounted corn planter that I'm hoping to use if/when things finally dry out here in northern Indiana.
This was originally a 3 point mounted 2 row planter. I unbolted the square tubing from the 3 point toolbar, removed one of the row units, and put a couple 1-1/4" holes through it, and now it'll mount to my rear cultivator arms, by just dropping the 1-1/4" pins through the bar into my cultivator clamps.

If I ever want to go back to the 3 point version, I just clamp the rectangle bar back to the 3 point tool bar.

The cub raises and lowers it with no troubles and the height seemed to work out just right.
Plus I think it'll make a right smart tool bar that something else could be mounted to, if the need arises.
You do not have the required permissions to view the files attached to this post.

Re: Ready for things to get fit!!

Mon Apr 22, 2013 6:03 pm

Clever solution!