This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Electrical Decision
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 80
- Joined: Wed Dec 21, 2011 9:01 pm
- Zip Code: 42301
- Tractors Owned: 1948 Farmall Cub
- Location: Owensboro, KY
Re: Electrical Decision
Barnyard and Rudi, I want to thank you for the useful information. For the time being I am going to be a purist. I think it is one of the lessor expensive options for me with the working parts I have. If I find that the 6 volt is not getting the job done, I will look into converting to 12 volts and unloading the 6 volt parts I have. Hey! who knows, I have enjoyed working on the restoration of my first cub I might decide to do a second and make it 12 volts.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Electrical Decision
You are welcome
I am not a purist by any means. I am just someone who believes that one should fix the underlying problems before simply throwing money at the problem - substituting 12v parts without solving the problems is simply a waste of resources and time to my mind. I am just frugal, some call me cheap, but I prefer frugal. Now, if my Cubs came equipped with 12v systems, I probably would have learned how to fix it and use 12 volts. However, my Cubs are 6 volt. Ellie my '48 came that way.
Granny my '47 had one of them really crappy 12 volt conversions that was not only an eyesore but didn't work at all. It was just a boogered up 6v system converted to 12v cause they couldn't be bothered fixing it properly. To start Granny, you still had to put the battery on a charger or boost it because it didn't charge at all. Butch said it never did
Jethro my '50 came the same way, complete with the hinged hood and a household light switch as the kill switch
I converted Granny back to a mag primarily because the genny came with her and I have extra mags. The distributor I traded for another mag. Oh, I still have an original battery ignition (distributor) to go with my 6 volt alternator.
If I was to ever get a Cub that came equipped with 12v, well that Cubby would stay 12v cause that's the way IH built her.
I am not a purist by any means. I am just someone who believes that one should fix the underlying problems before simply throwing money at the problem - substituting 12v parts without solving the problems is simply a waste of resources and time to my mind. I am just frugal, some call me cheap, but I prefer frugal. Now, if my Cubs came equipped with 12v systems, I probably would have learned how to fix it and use 12 volts. However, my Cubs are 6 volt. Ellie my '48 came that way.
Granny my '47 had one of them really crappy 12 volt conversions that was not only an eyesore but didn't work at all. It was just a boogered up 6v system converted to 12v cause they couldn't be bothered fixing it properly. To start Granny, you still had to put the battery on a charger or boost it because it didn't charge at all. Butch said it never did
Jethro my '50 came the same way, complete with the hinged hood and a household light switch as the kill switch
I converted Granny back to a mag primarily because the genny came with her and I have extra mags. The distributor I traded for another mag. Oh, I still have an original battery ignition (distributor) to go with my 6 volt alternator.
If I was to ever get a Cub that came equipped with 12v, well that Cubby would stay 12v cause that's the way IH built her.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 80
- Joined: Wed Dec 21, 2011 9:01 pm
- Zip Code: 42301
- Tractors Owned: 1948 Farmall Cub
- Location: Owensboro, KY
Re: Electrical Decision
Rudi, I completely understand. I have been called cheap as well, but I probably have spent more money on this tractor than I should have, but it has been an 8 year project and I am still not done. I look at it as a form of entertainment for me. Some people may go to the Boat to play the slots or go to caribbean, I like to tinker. I also like things put back the way they came as long as it is functional and can be done at reasonable expense. I think I am getting the best of both worlds on my tractor by going back to 6 volts.
-
- Team Cub
- Posts: 24282
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Electrical Decision
Come on up to the Bash next month and spend the week end learning Cub Stuff. You'll not only learn a few tricks but you'll also meet many of the forum folks while have a great time.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Electrical Decision
You know, your outlook is much the same as mine and probably many of our other members. We like to tinker, don't go runnin' the town, Mama always knows where we are, we are happy and content. Spending a little of our hard earned coin on our hobby is perfectly alright and I think that the majority of our brides will agree. Keeps us happy and out of troube
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 80
- Joined: Wed Dec 21, 2011 9:01 pm
- Zip Code: 42301
- Tractors Owned: 1948 Farmall Cub
- Location: Owensboro, KY
Re: Electrical Decision
Rudi, my wife is content and happy with me tinkering just as long as I don't slack on my chores around the house. Barnyard, I appreciate the invitation and it sounds like fun. I will consider making the trip. Thanks.
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Electrical Decision
Another 'moral' of the story is you found a good 'automotive' electrical guy and a good one at that.
The fellow that worked on my 6v generator found the problem right away.... some moron painted the whole thing and the frame needs to be grounded. A little paint removal at the bolt hole and now a good ground. Sometimes what should be obvious....
The fellow that worked on my 6v generator found the problem right away.... some moron painted the whole thing and the frame needs to be grounded. A little paint removal at the bolt hole and now a good ground. Sometimes what should be obvious....
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: Electrical Decision
Same problem with new starter for the W/H. Installed , no work, back to dealer, bench test,, works fine. Repeat, then back again to battery shop, finding bad ground because of paint.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Electrical Decision
Buzzard Wing wrote:some moron painted the whole thing
I wouldn't go "THAT" far ....
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: Electrical Decision
I have been cured of 'paint everything I touch'..... at least mostly. The only thing I painted on my 77 was the shifter, someone gaffed up a straight shifter with a bend in it, nothing to keep the shifter pointed north on a straight shifter. So I had to remove all traces of yeller from the bent shifter I had.
Another point not to paint is the VR plate where the ground strap/wire goes to one of the legs, that is the ground for the VR.
Another point not to paint is the VR plate where the ground strap/wire goes to one of the legs, that is the ground for the VR.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 80
- Joined: Wed Dec 21, 2011 9:01 pm
- Zip Code: 42301
- Tractors Owned: 1948 Farmall Cub
- Location: Owensboro, KY
Re: Electrical Decision
Well, I am going to have to admit that I am one of those morons. I have painted the starter, regulator and generator. Had to order the braces for my generator as I did not have them for the 6v and I am waiting for them to be delivered. I cleaned all the wire connections bare after I painted. Specifically, what else do I need to clean to get a good ground? Thanks for your help.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Electrical Decision
Where ever there is going to be metal to metal connection in the electric circuit has to be clean and bright. Terminals need to clean and bright and if possible all the terminal connections should be soldered and then shrink wrapped. After that ... not sure what else needs to be done, but then again, I am not a real electrical guy, I kinda just putz at it
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 80
- Joined: Wed Dec 21, 2011 9:01 pm
- Zip Code: 42301
- Tractors Owned: 1948 Farmall Cub
- Location: Owensboro, KY
Re: Electrical Decision
I will make sure I follow your advice on cleaning the connections. Looking at all the diagrams in the manuals the regulator/cutouts have all the terminals one one side. I did find one picture like mine which two terminals on one side and one on the other. However, it showed only one wire going to the generator. Can you tell me which is the BAT, the A and F connections on my type of regulator? Also my regulator/generator set up had two wires from the two terminals on the same side going to the generator. Can anyone explain this set up to me?
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Electrical Decision
Sounds like a Cut-Out to me.
GSS-1012 Electrical Equipment should be of help with the electrical.
Jim Becker and a couple of the others are the electrical guru's .. they can explain it a whole lot better. This is the thread that documents my trials at learning - Generator and Cut-Out
GSS-1012 Electrical Equipment should be of help with the electrical.
Jim Becker and a couple of the others are the electrical guru's .. they can explain it a whole lot better. This is the thread that documents my trials at learning - Generator and Cut-Out
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Team Cub
- Posts: 17312
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Electrical Decision
48Beacon wrote:Can you tell me which is the BAT, the A and F connections on my type of regulator?
Different reglators have their terminals in different places. It depends on the manufacturer and the model. You can not go by position to connect them. All regulators have F (may be FLD), G (may be GEN) and B (usually BATT). Some have L, depending on the application. You connect them as shown in the diagram on the page Rudi posted.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3
- 229
-
by Wingit
Tue Oct 11, 2022 9:07 am
-
- 6
- 237
-
by Jim Becker
Mon Aug 14, 2023 11:39 pm
-
- 32
- 737
-
by larryfoster
Tue Aug 08, 2023 9:47 pm
-
- 6
- 343
-
by Eugene
Fri Feb 03, 2023 12:01 pm
-
- 21
- 725
-
by Bill V in Md
Tue Apr 16, 2024 5:47 pm
Who is online
Users browsing this forum: No registered users and 3 guests