Wed Apr 17, 2013 6:31 am
This is the cheapest place I have found seats. I got one and it isn't to bad.http://www.ruralking.com/catalogsearch/result/index/?limit=48&q=farmall
Wed Apr 17, 2013 6:33 am
Although mine did not come from OEM, I'm pretty sure it's the same seat. Actually, I've been a little disappointed with it. If it gets rained on, you'll have a wet butt for days. If I were buying another, I would get silver vinyl. I would also spend the extra few bucks for the grommet. After about 4 yrs. on the tractor, the upholstery has begun puckering in places, it's not nearly as pretty as it was when new. Again, I think vinyl would have held it's shape better.
Wed Apr 17, 2013 9:18 am
Just make sure it is the version with a grommet. Their (OEM's) picture of the bottom shows the hole but the top doesn't.
Wed Apr 17, 2013 9:00 pm
Steiner has good quality parts also.
Thu Apr 18, 2013 6:02 am
Thanks for all of the suggestions and comments. As always very helpful.
Thu Apr 18, 2013 5:04 pm
This looks good but no drain hole. Some suppliers have this seat with the brass center drain hole. Or, maybe you plan to cover it on those rainy days. Just a thought...........
Sun Apr 21, 2013 5:44 am
I have bought several from OEM, both vinyl and canvas and they all seem fine. I don't have any with the drain holes but mine don't sit outside only at shows and the canvas seat is only on my Super C with a flip over base. OEM also seems to be very competitive on price.
Sun Apr 21, 2013 10:01 am
My seat rusted out in the middle, and threatened to impale me, so I cut out the rusty section, drilled the spot welds, and replaced the center of the seat. It lasted for about two years, and then started cracking around the edge of the mounting bracket. Probably not worth the hassle. I just got a new silver canvas seat from a seller on e-bay. Only had it on about a week, but it is more comfortable than the plain steel.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.