Tue Apr 02, 2013 8:16 am
I dropped the oil pan to change the gasket and look what I found in the oil pan. I am not sure where in the engine it came from.
Tue Apr 02, 2013 8:43 am
Touch-Control pump drive gear?
Tue Apr 02, 2013 8:44 am
Looks like the nut and washer from the hydro pump to me.
Tue Apr 02, 2013 9:41 am
Tezell wrote:Looks like the nut and washer from the hydro pump to me.
That's exactly what it is.
Tue Apr 02, 2013 9:48 am
Bob, If you haven't ever had that pump off to check or rebuild, you might want to take it off and make sure the lock washer and nut are on the gear.
Tue Apr 02, 2013 9:59 am
That's what it is, Bob! I've seen a few of them, dug out of sludge, in the pan. I'm surprised that you didn't call me, when you found it! Ed
Tue Apr 02, 2013 10:30 am
list them in the for sale section
Tue Apr 02, 2013 10:35 am
tst wrote:list them in the for sale section
Good Idea Tim, that washer is a lot of money form Case IH.
Thanks guys I could not place that washer in my mind. Out comes the pump.
Next time you will get a visit from me after work with the part in my hand, Put the coffee pot on.
Tue Apr 02, 2013 3:34 pm
Bob I think Ed meant that you should have said he broke it. LOL
Tue Apr 02, 2013 6:04 pm
Cecil wrote:Bob I think Ed meant that you should have said he broke it. LOL
Cecil, I did break it, when I was there, working on the SA. Did it, when I took the switch from that cub. Don't tell Bob! Ed
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.