This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
My Restoration of Rex '48 - #21005
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
Had a pretty productive weekend with Rex '48.
The governor is ready to go.
The left final drive painted both sides. Fully ready for installation. Waiting for seals for the right final drive.
Torque Tube and Transmission - Two coats of primer - two coats of paint - on every part of Rex '48 so far.
Will be putting this drive together this week - just waiting on seals
The governor is ready to go.
The left final drive painted both sides. Fully ready for installation. Waiting for seals for the right final drive.
Torque Tube and Transmission - Two coats of primer - two coats of paint - on every part of Rex '48 so far.
Will be putting this drive together this week - just waiting on seals
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
A great Monday - Seals came in and this is finished painted - 2 Coats Primer - 3 Coats Paint.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Hengy
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
- Contact:
Re: My Restoration of Rex '48 - #21005
Nice!!! Shines great!
-
- 10+ Years
- Posts: 935
- Joined: Tue Apr 08, 2008 7:01 pm
- Zip Code: 19344
- Circle of Safety: Y
- Location: PA, Honey Brook
Re: My Restoration of Rex '48 - #21005
Looks great Ken.
My question is, have you reached the " Golden Moment Of Turn-Around" ?
That is, have you gotten to the point when you finish taking things apart and begin to
put it back together ?
Russ
GMOTA borrowed from Roger Welsch
My question is, have you reached the " Golden Moment Of Turn-Around" ?
That is, have you gotten to the point when you finish taking things apart and begin to
put it back together ?
Russ
GMOTA borrowed from Roger Welsch
1979 International Cub (Artie),193 plow,22 sickle mower,144 cultivator,54a blade,59" belly mower,wheel weights
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
1944 John Deere B , A-3 B-3 two way plow.....Grandpa's Deere,Still can't find his FARMALL A
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
RUSSALL wrote:Looks great Ken.
My question is, have you reached the " Golden Moment Of Turn-Around" ?
That is, have you gotten to the point when you finish taking things apart and begin to
put it back together ?
Russ
GMOTA borrowed from Roger Welsch
The Golden Moment of Turn-Around has arrived - Just this afternoon.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- 10+ Years
- Posts: 17
- Joined: Tue Jun 29, 2010 8:13 pm
- Zip Code: 63126
Re: My Restoration of Rex '48 - #21005
Ken, looks great!, I've been through this thread several times looking for info on your painting method. What kind of painting gun and are you using IH 2150? Can't wait to see the finished product. Thanks for any info .... art
-
- 10+ Years
- Posts: 79
- Joined: Mon Jan 10, 2011 7:01 pm
- Zip Code: 12578
- Tractors Owned: 1948 Cub w/FH
1948 Cub w/ International 1000 loader
1946 BN
1953 Super C w/FH
1968 John Deere 55 combine
1983 International 1440 - Circle of Safety: Y
- Location: Salt Point N.Y.
Re: My Restoration of Rex '48 - #21005
I was wondering the same thing.
Rich
Rich
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
artjh wrote:Ken, looks great!, I've been through this thread several times looking for info on your painting method. What kind of painting gun and are you using IH 2150? Can't wait to see the finished product. Thanks for any info .... art
IHfarmer wrote:I was wondering the same thing.
Rich
If ya'll promise not to laugh - I'll tell you how I've painted Rex and the reasons why. Promise?
Art et al, While I have a Campbell Hausfeld HVLP sprayer - I don't have the shop setup to use it. Believe it or not, I've done this whole job - one rattle can of IH 2150 Red at a time. Every nut, bolt, lock washer, spring, etc, has been individually sand blasted and painted by hand - one piece at a time.
I only have a single car shop to house everything for this job - tools, clean parts, blasting cabinet, tool box, benches - etc. It makes for quite a logistically planning process. I have made special wire hooks to hang all the parts for spraying outside and drying inside, a lazy susan painting stand and a bolt spray station.
Thanks all for following my post and asking your question.
Now stop laughing
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
Got this seated into position and held with temporary bolts last evening. I need to get replacement bolts - the originals had rusted quite badly and some of them twisted off during tear-down.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
A bit more IH 2150 Red.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
-
- 10+ Years
- Posts: 159
- Joined: Sun Apr 07, 2013 10:41 pm
- Zip Code: 47359
- Tractors Owned: Farmall 200
1956 Farmall Cub
1961 Farmall Cub
Farmall 460D
International 656D Hi-Clear
Farmall 806D
Allis Chalmers 5020 - Location: Blackford County, Indiana
Re: My Restoration of Rex '48 - #21005
I have got to ask. How many cans of paint are needed to paint a Cub at this level? Thanks for sharing all the details and pictures. I have learned a lot from your posts about this project. The Cub looks wonderful.
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
Xperimental wrote:I have got to ask. How many cans of paint are needed to paint a Cub at this level? Thanks for sharing all the details and pictures. I have learned a lot from your posts about this project. The Cub looks wonderful.
It will be about 22-25 cans of IH 2150 Iron Guard Red and about 20 cans Primer. I'm keeping track, I'm publishing a spreadsheet when I am done for the all in parts and all.
Ken
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Bill Hudson
- Team Cub
- Posts: 9516
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: My Restoration of Rex '48 - #21005
PVF1799 wrote:... I'm keeping track, I'm publishing a spreadsheet when I am done for the all in parts and all.
Ken
Now that will be interesting. Are you going to have Rex at Cecil's or am I going to have to stop by for a private showing?
Bill
- PVF1799
- 10+ Years
- Posts: 1475
- Joined: Fri Mar 15, 2013 9:46 pm
- Zip Code: 12009
- eBay ID: kepara
- Tractors Owned: 1929 Farmall Regular #T111250 (Original Owner)
1942 Farmall M #55654
1948 Farmall Cub #21005
1955 Farmall Cub #190769
1961 Cub Cadet #16509
1975 Cub Cadet 1250H
197x IH 990 Haybine
1994 JD 5320 Diesel
Attachments: Woods 42F Fast Hitch, L38 Disc Fast Hitch, F11 Plow Fast Hitch, Land Plow, Snow Plow, Grader Blade, Planter w/Fertilizer, Cultivators, Hilling Disks, Sickle Bar Mower(2), IH 7' Sickle Bar Mower, Flail Mower and 5' International Belly Mower. - Circle of Safety: Y
- Location: Altamont, NY
- Contact:
Re: My Restoration of Rex '48 - #21005
Bill - Rex will NOT be ready for Cecil's This is taking way more time than I thought it would. Private showings are available on request.
Ken
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
Pleasant View Farm - Est. 1799
1930 Farmall Restoration Project
My Restoration Project - FCUB '48 - Rex
- Bill Hudson
- Team Cub
- Posts: 9516
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: My Restoration of Rex '48 - #21005
You just may get a request.
Bill
Bill
Who is online
Users browsing this forum: No registered users and 28 guests