Clearly the carb inlet's been stripped out at least twice now. It's a leaker.
What little thread that's left is definitely 9/16-18.
The carb came with an oddball compression fitting, one side 5/16" compression, the other side 9/16-18 threaded.
Is the hole too big for a helicoil?
Should I just JB weld the compression fitting into the carb ala Lurker Carl?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
9/16-18 thread, stripped carb inlet
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4949
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
-
- 10+ Years
- Posts: 1203
- Joined: Fri Apr 06, 2012 6:30 pm
- Zip Code: 00000
Re: 9/16-18 thread, stripped carb inlet
I JB welded mine in and it is very successful, because in my ignorance I had never heard tell of helicoiling as you can see in a previous post
Donegal Cub,
Donegal Cub,
-
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
Re: 9/16-18 thread, stripped carb inlet
1/2 - 20 is the correct thread size for the carb inlet. It can be helicoiled and I believe there is a "how to" in the CBoK.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
-
- Team Cub
- Posts: 11861
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: 9/16-18 thread, stripped carb inlet
The drill size for the 1/2-20 helicoil is 33/64" (.052). 9/16" equates to .056. PM sent.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Similar Topics
- Replies
- Views
- Last post
-
- 9
- 254
-
by BullDAWG
Thu Jun 23, 2022 2:55 am
-
- 5
- 250
-
by Stanton
Fri Jun 17, 2022 7:36 am
-
- 2
- 223
-
by ricky racer
Sat Oct 08, 2022 1:53 pm
-
- 2
- 151
-
by Dale Finch
Mon Aug 07, 2023 3:27 pm
-
- 1
- 225
-
by Eugene
Sat Oct 16, 2021 7:59 pm
Who is online
Users browsing this forum: Inspectorjoe, Majestic-12 [Bot] and 4 guests