radiator capModerator: Team Cub
6 posts
• Page 1 of 1
radiator cap1951 Farmall cub. I just put a new radiator in. Everything fit,except the radiator cap. The new one didn't come with a cap. It seems like the spring is to long. So you can't push the cap down far enough to get it on. Any suggestion?
Re: radiator capThere are 2 different caps sounds like you have a long cap on a short neck. I have a brandy new long cap on my desk at home, too. Only been tried to be used once....
Welcome to the forum! Here is a link to one of our sponsors. Stock caps were not pressurized. http://www.tmtractor.com/new/co/co_001newparts.htm
Re: radiator capG'day to you and your '51 Cub
As Bob said, the Cub has a non-pressurized cap although a 3-4 lb cap can be used. Tom and Lynn at TM Tractor do have the right caps and are great to deal with. Suggest you spend a little comfy time with a cup of coffee or something and read the materials at the links below:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie Cub Manual Server
Re: radiator capIn 51 that is a non pressure cap, it should be just a cap with a gasket on it, no spring under it
Tim
Re: radiator capCUBS AT HIGH ALT. (3000 FT.OR UP ) CAME WITH PRESS. CAPS------- MY CUBS HAS 16# HAVE 16 # CAPS------
Re: radiator capPrevious informative post about rad caps... viewtopic.php?f=1&t=74430
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
6 posts
• Page 1 of 1
Who is onlineUsers browsing this forum: Arthur Luke, Lurker Carl, Steve H and 6 guests |
|