Wed Feb 20, 2013 8:54 am
Hello all, I came across a local add for rear wheel weights that will come off a farmall A , before I buy, just wanted to double check if they do indeed fit a farmall Cub? Thanks, Jim
Wed Feb 20, 2013 8:56 am
Wed Feb 20, 2013 8:57 am
Wed Feb 20, 2013 10:40 am
i have started to like they way the A weights look on a cub better than the cub weights.
Wed Feb 20, 2013 11:41 am
They will bolt on, as to weather they fit is in the eye of the beholder
Wed Feb 20, 2013 1:06 pm
its not hard to wash out dust dirt or mud behind them lol
Thu Feb 21, 2013 4:10 pm
Yes they fit but if your going to run doubles for snow plowing you might what to get the same ones. A friend of mine has the A weights, as I do, on his cub. He mounted standard cub weights on top of the A weights and had a time of it to get the bolts to line up. I told him he just should have mounted 2 cubs on one side and 2 A's on the other side.
Thu Feb 21, 2013 9:10 pm
thanks for the info. nice picture of the loboy weights look good
Thu Feb 21, 2013 10:13 pm
I have a set on Merlin, and they do indeed mount as you can see. The bolt holes do not line up perfectly, but there is enough wobble in the bolts that allow them to fit. The A weights are not quite as heavy as Cub weights, as well, I believe.
Good to see you on the forum again, Jim!
Fri Feb 22, 2013 7:41 am
Nope, the A weights are definitely heavier. The A weights are a bit over 150 pounds each. The Cub weights are 135 pounds each.
Fri Feb 22, 2013 8:28 am
As far as the weight of each, are A weights the same as Super A weights? If so, here are comparisons from the parts manuals. Of course once we get to this much weight, a few pounds won't be a big difference.
You do not have the required permissions to view the files attached to this post.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.