This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
looking for 6volt starter rebuild kit.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
looking for 6volt starter rebuild kit.
I see you can get the 6 volt positive ground starter brushes and bushings on line for between 9 and 12 dollars. Does any one have a part number for a kit that I could pick up at my local parts store? I think if I ordered it on line id pay more for postage than the parts are worth. I dont have any case dealers close by. Thanks in advance.
Pete from Virginia Beach
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: looking for 6volt starter rebuild kit.
NAPA has them or can get them, you would do well to get the springs too, NAPA does not have them
but are on E Bay
Boss
but are on E Bay
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: looking for 6volt starter rebuild kit.
Put in new bushings while you are at it. Then it will be good for a few more decades.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: looking for 6volt starter rebuild kit.
http://www.ebay.com/itm/IH-Farmall-C60- ... 2c61273a7e
and free shipping, I use this kit. It is a good one
Boss
and free shipping, I use this kit. It is a good one
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: looking for 6volt starter rebuild kit.
Couple of thoughts. Auto parts store for the bushings and brushes. Take in the numbers off your starter's ID plate. Also take in your old brushes. If you want measure up the OD of the bushings and the ID of the shaft.
Some auto parts stores have the bushings and brushes in assortment kits and will match up replacement parts to your measurements or old parts.
Check prices with the local starter/generator rebuilder. May be worth it to have the rebuilder completely work over the starter.
Some auto parts stores have the bushings and brushes in assortment kits and will match up replacement parts to your measurements or old parts.
Check prices with the local starter/generator rebuilder. May be worth it to have the rebuilder completely work over the starter.
I have an excuse. CRS.
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: looking for 6volt starter rebuild kit.
It is less than $20 with shipping, how much will you save after running around looking for the parts that may fit? You will not find the spring I expect.
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 804
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: looking for 6volt starter rebuild kit.
I bought brushes and bushings off ebay from a guy up Dayton way for about $12.00 delivered. Still have the bushings if somebody wants them...
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: looking for 6volt starter rebuild kit.
Did they come with springs?
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: looking for 6volt starter rebuild kit.
Pete:
I know that sometimes doing it ourselves is a lot of fun, but when it comes to the Generators and Starters I just take them to my local AC Delco Authorized Service Center. That way I know it is done RIGHT and will last another 60 years. They change the brushes, springs, bearings (replace with sealed ones) do a complete rebuild. I had a bunch of them done - Generator and Cut-Out and the per unit cost was very reasonable. No muss, no fuss and no bother. Guaranteed too
I know that sometimes doing it ourselves is a lot of fun, but when it comes to the Generators and Starters I just take them to my local AC Delco Authorized Service Center. That way I know it is done RIGHT and will last another 60 years. They change the brushes, springs, bearings (replace with sealed ones) do a complete rebuild. I had a bunch of them done - Generator and Cut-Out and the per unit cost was very reasonable. No muss, no fuss and no bother. Guaranteed too
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Team Cub Mentor
- Posts: 20401
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: looking for 6volt starter rebuild kit.
I get virtually all my parts from the local auto parts store. Usually less than the advertise price on the internet and I pay no postage or shipping fees. Auto parts store will have the bushings and brushes either on hand or orderable.
Might try your local starter/generator rebuilder. I recently had a shop rebuild the starter for my WD Allis Chalmers. Cost me $36.??. True. I realize that most shops will charge more, perhaps much more. But worth it to have the commutator turned.
Might try your local starter/generator rebuilder. I recently had a shop rebuild the starter for my WD Allis Chalmers. Cost me $36.??. True. I realize that most shops will charge more, perhaps much more. But worth it to have the commutator turned.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 804
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: looking for 6volt starter rebuild kit.
This is what I bought. No springs, but I needed brushes in the worst way. Bushings were still fine.
http://www.ebay.com/itm/IH-Farmall-C60- ... OC:US:3160
As far as the local starter shop - the one we could afford closed up (retired) and the only one that's left in the area we can't afford.
http://www.ebay.com/itm/IH-Farmall-C60- ... OC:US:3160
As far as the local starter shop - the one we could afford closed up (retired) and the only one that's left in the area we can't afford.
-
- 10+ Years
- Posts: 4565
- Joined: Wed Feb 05, 2003 1:18 pm
- Zip Code: 45365
- Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
- Circle of Safety: Y
- Location: OH, Sidney
Re: looking for 6volt starter rebuild kit.
ntrenn wrote:This is what I bought. No springs, but I needed brushes in the worst way. Bushings were still fine.
http://www.ebay.com/itm/IH-Farmall-C60- ... OC:US:3160
As far as the local starter shop - the one we could afford closed up (retired) and the only one that's left in the area we can't afford.
That's the same seller that Boss referenced above. Same seller, different kit.
-
- 10+ Years
- Posts: 449
- Joined: Wed Feb 05, 2003 11:49 pm
- Zip Code: 71328
- Location: LA, Deville
Re: looking for 6volt starter rebuild kit.
ntrenn wrote:This is what I bought. No springs, but I needed brushes in the worst way. Bushings were still fine.
http://www.ebay.com/itm/IH-Farmall-C60- ... OC:US:3160
As far as the local starter shop - the one we could afford closed up (retired) and the only one that's left in the area we can't afford.
That is the same kit I put in mine. My springs were fine. I pressed in the new bushings and turned the commutator on my lathe.
Old Age: The phase of life when nothing works and everything hurts...
-
- 10+ Years
- Posts: 804
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: looking for 6volt starter rebuild kit.
My commutator looked like a potato patch, but it's working just fine. Haven't added lathe to my arsenal yet...
-
- 10+ Years
- Posts: 383
- Joined: Sun Nov 23, 2008 2:46 pm
- Zip Code: 23453
- Tractors Owned: .
48 cub
67 loboy
52 super c
74 cub 154
50 c - Circle of Safety: Y
- Location: Virginia Beach
Re: looking for 6volt starter rebuild kit.
Well I tried the NAPA store and they couldnt find anything. They even called out to the farming comunity of Pung and still got nothing. So I took your advice Boss and got the set off ebay withthe springs. Seems kinda funny that all i could find fom the delco web site was just for autos. Oh well I ll have em next week some time. Thanks again Boss and to all the others that posted their input. All good sugjestions. Thanks
Pete from Virginia Beach
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Starter sluggish, time for rebuild? Attachment(s)
by ArtB » Tue Mar 26, 2024 2:28 pm » in Farmall Cub - 7
- 280
-
by ArtB
Fri Mar 29, 2024 12:13 pm
-
-
- 5
- 332
-
by Gary Dotson
Fri Nov 10, 2023 8:36 am
-
- 8
- 1078
-
by inairam
Mon Jan 15, 2024 6:53 am
-
- 6
- 530
-
by billsanfilippo@yahoo.com
Tue Feb 22, 2022 4:31 pm
-
- 3
- 361
-
by Leewebb7
Thu Dec 07, 2023 9:44 pm
Who is online
Users browsing this forum: No registered users and 3 guests