This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Found a Blade....Need to know ...
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Found a Blade....Need to know ...
I found a blade for my cub and am going to pick it up on Friday. What I would like to know is what type of blade it is and I need to make sure I get all the brackets. Could some one tell me what model blade this is in the picture below? and if there is and documentation or images with it installed so that I make sure that I get all the hardware I need to mount it? Any help would be greatly appreciated.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 6352
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Found a Blade....Need to know ...
It's a 54 or 54A. Manual at top of this page.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Found a Blade....Need to know ...
With the cultivators thrown in the mix it is hard to tell if all of the grader is there.
Here is a link from TM Tractor parts showing one style. You may want to look at some of their other pages also.
http://www.tm-tractor.com/gim/blade54apallet_001.htm
Here is a link from TM Tractor parts showing one style. You may want to look at some of their other pages also.
http://www.tm-tractor.com/gim/blade54apallet_001.htm
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 3428
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Found a Blade....Need to know ...
Most of the parts in the pic are cultivator parts. Blade does not appear to be complete. More pics would help with the parts separated.
Thomas
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Found a Blade....Need to know ...
Thanks for the quick reply......i thought it may be a 54....but just wanted to get a 2nd & 3rd opinion. Thanks for the links and the help!!
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Found a Blade....Need to know ...
The price for the blade is $200....does that seem reasonable to you guys? From the pic it looks to be in good shape...but it only seems to have the hardware for a mid mount setup...I guess I could find the hardware for a front mount later....
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
Re: Found a Blade....Need to know ...
CPIII wrote:The price for the blade is $200....does that seem reasonable to you guys? From the pic it looks to be in good shape...but it only seems to have the hardware for a mid mount setup...I guess I could find the hardware for a front mount later....
In my opinion, yes, if you can at least mid mount it, that is reasonable.
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Found a Blade....Need to know ...
From what I see in the photo, there is not enough of it there to properly mid mount it.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
Re: Found a Blade....Need to know ...
Barnyard wrote:From what I see in the photo, there is not enough of it there to properly mid mount it.
It appears to have a substitute drawbar, he may luck out Bill.
CPIII - I wouldn't commit to buying it until looking at it in person.
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Found a Blade....Need to know ...
Which part(s) is(are) missing? I see the spring that connect to the Touch Control arm and the the spreader bar in the rear to go between the finals......what am I missing?
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
Re: Found a Blade....Need to know ...
CPIII wrote:Which part(s) is(are) missing? I see the spring that connect to the Touch Control arm and the the spreader bar in the rear to go between the finals......what am I missing?
Charles, that isn't the lift spring arm, that is the tension spring on the underside of the blade.
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Found a Blade....Need to know ...
Adding a pic of the rear of the blade
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- 10+ Years
- Posts: 669
- Joined: Wed Sep 30, 2009 9:43 am
- Zip Code: 77355
- eBay ID: czechiii
- Tractors Owned: 48 Cub SN 54XXX (Captain Crunch)
47 Farmall A (Patches) - Circle of Safety: Y
- Location: Magnolia, Texas
Re: Found a Blade....Need to know ...
cubguy47 wrote:CPIII wrote:Which part(s) is(are) missing? I see the spring that connect to the Touch Control arm and the the spreader bar in the rear to go between the finals......what am I missing?
Charles, that isn't the lift spring arm, that is the tension spring on the underside of the blade.
You can barely see it through all of the brackets here:
Ah......I see...he said it was "all there" but will confirm later today before I make the trip as it is about 1.5 hour away.
Charles Patek III
Some days - Chicken.......Some days - Feathers
Words to live by....
Some days - Chicken.......Some days - Feathers
Words to live by....
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Found a Blade....Need to know ...
Just having the substitue bar isn't enough to mid mount. It would help if we could see a pic of everything that is with it. It is upside down in the first pic so it is hard to tell how much of the front mounting hardware is there.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Found out why my TC doesn't work Attachment(s)
by Bill Hudson » Sat Oct 15, 2022 7:51 pm » in Farmall Cub - 4
- 344
-
by Bill Hudson
Sun Oct 16, 2022 5:04 pm
-
-
- 11
- 734
-
by 69ranger
Tue Dec 14, 2021 11:33 pm
-
-
Newly found Chinese carb problem Attachment(s)
by Bob McCarty » Mon Aug 02, 2021 5:00 pm » in Farmall Cub - 12
- 804
-
by radioguy41
Wed Jun 01, 2022 9:49 pm
-
-
- 6
- 234
-
by yesmar74
Sat Jul 09, 2022 5:19 am
-
- 4
- 227
-
by Jim Becker
Mon Dec 13, 2021 12:25 pm
Who is online
Users browsing this forum: No registered users and 3 guests