This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
touch control
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 16
- Joined: Sat Oct 13, 2012 6:12 am
- Zip Code: 42368
touch control
hey guys took manifold off the side of touch control houseing going to replace the gasket thought there might be some o rings did not see any guess it is gasket only i no there are 2 o rings on pump mainfold want to make sure before i put gasket Also going to pull touch control houseing so i can clean everything up do i need to order a bottom houseing gasket or can i clean it all up and use some form a gasket talking about where touch control bolts down on tractor Thanks fellows
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: touch control
Where manifold bolts to tractor is gasket only. There is no gasket under the unit, just metal to metal. You will not need a gasket unless you take the bottom plate off the touch control. If you do that, ge6t a gasket, rather than form a gasket. I tiny spec of the form a gasket getting inside the system can easily cause a complete rebuild.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 1050
- Joined: Tue Apr 26, 2011 10:47 am
- Zip Code: 44266
- Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C - Circle of Safety: Y
- Location: Ravenna, Ohio
Re: touch control
Hey there, Johns got you covered. You can try this site though, it's listed under "manuals" at the top of this page. http://www.cleancomputes.com/Cub/Blue%2 ... index.html , for some reason it's not working right now. Ordinarily it works well and it's a great source for anything Cub related. Good luck!
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: touch control
Ray:
It is up and working. Not sure what the problem was for you.. could have been as simple as a power bump.
It is up and working. Not sure what the problem was for you.. could have been as simple as a power bump.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 273
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
- 5
- 1119
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 237
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 0
- 89
-
by Tristan55555
Thu Apr 11, 2024 1:07 pm
-
- 30
- 1139
-
by LyleDoe
Sun Mar 13, 2022 10:58 am
Who is online
Users browsing this forum: No registered users and 4 guests