Page 1 of 1
Parts Data Base
Posted: Mon Jan 28, 2013 6:56 pm
by wfmdfm
I am wondering where in the data base are nut and bolt sizes? I need to pick up the 3/8 bolts for the PTO plate. Not a big mystery to figure out the size and length but I thought I would look it up for the correct size. I don,t see them in any of the transmission and PTO section. Are they listed someplace else?
Wally
Re: Parts Data Base
Posted: Mon Jan 28, 2013 7:03 pm
by tst
In the IH manual look at the part you need the bolt for, it will tell you for example Part XXXX uses 9 3/8-18 x 1" bolts
Tim
Re: Parts Data Base
Posted: Mon Jan 28, 2013 7:22 pm
by wfmdfm
Got it. I was looking in the On-line DB. I should have stayed old school and looked in the book.
Wally
Re: Parts Data Base
Posted: Mon Jan 28, 2013 7:38 pm
by bob in CT
I put together a spreadsheet to help me inventory what I needed for dot head bolts. All the info came from the books, one page at a time.
Re: Parts Data Base
Posted: Mon Jan 28, 2013 10:19 pm
by CapeCodCubs
wfmdfm wrote:Got it. I was looking in the On-line DB. I should have stayed old school and looked in the book.
Wally
Bob sent out the bolt database...I can forward to you...email me at
twin49cubs@verizon.net and I send it over to ya