Snow in the Berkshires, too

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Chris D
5+ Years
5+ Years
Posts: 398
Joined: Tue Nov 30, 2010 7:54 pm
Zip Code: 23027
Circle of Safety: Y

Re: Snow in the Berkshires, too

Postby Chris D » Sat Dec 29, 2012 2:39 pm

The bolt to adjust the blade cutting angle is in the center of the blade just below where the pin would drop thru for side to side angle adjustment. There are 3 adjustment holes there and yours seems to be in the hole closest to the front. There is a bracket with the rod and spring that bolts there. The rod and spring are laying down. If you move the bolt to the center hole it will stand the blade up and do a much better job. This is the bolt these guys are referring to. Check under the main frame just below the center angle adjusting pin.

  • Similar Topics
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 5 guests