Hi,
I have a complete sickle bar set up for a cub, What is it worth?
Rick
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Prices
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
I saw a couple on E-bay lately but don't remember what they were going for. The biggest thing from what I can see is where are you. That seems to be a big determineer of prices.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
-
- 10+ Years
- Posts: 96
- Joined: Fri Feb 25, 2005 5:38 pm
- Location: oklahoma
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
In this area, $125 to $175 if they are in good condition.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 259
- Joined: Mon Jan 12, 2004 9:58 pm
- Location: CNY
I saw one at the local farm bureau auction a couple weeks ago it went for $350
It was nice but not that nice. The drag bar was home made. I was willing to go as high as $125.
A 193 plow went for $250 and a belt pulley went for $95.
I would have put some of my stuff in the sale if I knew it was gonna be like that.
Rondell
It was nice but not that nice. The drag bar was home made. I was willing to go as high as $125.
A 193 plow went for $250 and a belt pulley went for $95.
I would have put some of my stuff in the sale if I knew it was gonna be like that.
Rondell
-
- Cub Pro
- Posts: 2575
- Joined: Mon Feb 03, 2003 5:25 am
- Zip Code: 37774
- Tractors Owned: 1948 McCormick-Deering Farmall Cub
152 Disc Plow & Flat Belt Pulley
Brinly #8 Moldboard Plow
1971 JD 112 Garden Tractor
1928 Economy Hit & Miss Engine
1927 David Bradley "Little Wonder" Feed Grinder
1 A.H. Patch Corn Shellers
1 A.H. Patch #1 Grist Mill - Circle of Safety: Y
- Location: TN, Loudon (near Knoxville)
When you say "Complete" that means that your Model 22 Sickle bar has ALL its parts...INCLUDING the drive belt shield, the grass board and grass rod and the stay rod crank . IF you have ALL these rare and hard-to-find parts...PLUS all the rest of the sickle bar parts...THEN your sickle bar should be worth nearly $350.00 when it's painted and restored .
"Save The Possums...Collect The Whole Set"
"Tennessee Sun-Dried Possum...Heaven In A Can"
"Tennessee Sun-Dried Possum...Heaven In A Can"
-
- 10+ Years
- Posts: 179
- Joined: Sat Jun 19, 2004 5:37 pm
- Location: New Hampshire
-
- Similar Topics
- Replies
- Views
- Last post
-
- 19
- 920
-
by Waif
Sat Feb 25, 2023 5:02 pm
Who is online
Users browsing this forum: Majestic-12 [Bot] and 5 guests