This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Removing rear roller bearing on spline shaft

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
David C
10+ Years
10+ Years
Posts: 611
Joined: Tue Dec 02, 2003 9:17 pm
Zip Code: 47141
Tractors Owned: 1949 Farmall Cub, 1970 135 Massey Ferguson, 1970 175 Massey Ferguson, 1964 Cub Cadet Model 70. 1977 Farmall 140 (Granpa's)
Location: Marysville, Indiana

Postby David C » Sun May 01, 2005 7:23 pm

the rear bearing goes out the PTO shaft side of the case. You have to remove the rear cover for big paws like mine :lol:

David C.
I may be old but I got to see all the cool bands
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
David C
10+ Years
10+ Years
Posts: 611
Joined: Tue Dec 02, 2003 9:17 pm
Zip Code: 47141
Tractors Owned: 1949 Farmall Cub, 1970 135 Massey Ferguson, 1970 175 Massey Ferguson, 1964 Cub Cadet Model 70. 1977 Farmall 140 (Granpa's)
Location: Marysville, Indiana

Postby David C » Mon May 02, 2005 8:27 am

I milled down a piece of long brass at work just shy of the bearing I.D. with a shoulder on it. I did ding up the inner shield a little, but worked it out. The larger rear shield is on a step and it was drove back in w/ a socket during installation...

DavidC.
I may be old but I got to see all the cool bands
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 54 guests