Page 1 of 1
Cub Timing
Posted: Mon Nov 26, 2012 9:48 am
by Monstercub
A quick question. This may be a stupid question, but, would you use the same type of timing techniques on a magnito distributor as you would a regular one? I'm also talking about looseningthe bolts and turning it to adavance or retard the ignition. Thank you!
Re: Cub Timing
Posted: Mon Nov 26, 2012 9:52 am
by Former Member
Yes
Re: Cub Timing
Posted: Mon Nov 26, 2012 11:07 am
by Jim Becker
Minor exception, rotate the opposite direction for the same effect. You rotate the top of a magneto out (clockwise) to advance. You rotate the battery ignition distributor in (counterclockwise) to advance.
Re: Cub Timing
Posted: Mon Nov 26, 2012 11:35 am
by John *.?-!.* cub owner
There are a couple of exceptions. Static timing is the same, but the crank pulley will not have an advance mark on it.
Go to
http://www.cleancomputes.com/Cub/Blue%2 ... index.html and [pages 4, 5, 6 have the magneto timing instructions.
Re: Cub Timing
Posted: Mon Nov 26, 2012 12:10 pm
by Monstercub
Thank you all very much!