Cub Timing
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 45
- Joined: Tue Feb 22, 2011 1:03 pm
- Zip Code: 06478
- Tractors Owned: 1949 CUB
Cub Timing
A quick question. This may be a stupid question, but, would you use the same type of timing techniques on a magnito distributor as you would a regular one? I'm also talking about looseningthe bolts and turning it to adavance or retard the ignition. Thank you!
-
- Team Cub
- Posts: 13292
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cub Timing
Minor exception, rotate the opposite direction for the same effect. You rotate the top of a magneto out (clockwise) to advance. You rotate the battery ignition distributor in (counterclockwise) to advance.
-
- Team Cub Guide
- Posts: 22534
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Cub Timing
There are a couple of exceptions. Static timing is the same, but the crank pulley will not have an advance mark on it.
Go to http://www.cleancomputes.com/Cub/Blue%2 ... index.html
and [pages 4, 5, 6 have the magneto timing instructions.
Go to http://www.cleancomputes.com/Cub/Blue%2 ... index.html
and [pages 4, 5, 6 have the magneto timing instructions.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 5+ Years
- Posts: 45
- Joined: Tue Feb 22, 2011 1:03 pm
- Zip Code: 06478
- Tractors Owned: 1949 CUB
Re: Cub Timing
Thank you all very much!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 299
-
by Jim Becker
Sun Dec 13, 2015 9:47 pm
-
- 2
- 289
-
by Glen
Fri Apr 15, 2016 10:06 pm
-
- 3
- 186
-
by LRiddle
Sat Apr 09, 2016 2:44 pm
-
- 1
- 126
-
by staninlowerAL
Fri Oct 14, 2016 6:29 pm
-
- 9
- 399
-
by Eugene
Tue Jun 02, 2015 12:16 pm
Who is online
Users browsing this forum: raystractors, Tom and 3 guests