This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Governor Control Lever

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Governor Control Lever

Postby Stanton » Mon Nov 26, 2012 9:34 am

Nice day yesterday, so got out my Cubs to let them run for a while. Was reminded that my 1948's governor control lever (aka, throttle lever) had a worn spot in the tooth; it sometimes pops back to a lower RPM setting after setting it higher. Also inpsected the other two, same worn spot/condition. So, after I was done running them, I parked 'em and removed the levers from all three. Got out the welder and filled the worn tooth and the worn curved indentation on the lower portion as well. Ground them smooth, primed and painted (over 50 degrees F yesterday). They should be ready for another 40-50 years. :D

BTW: My '47 and '48 had levers that have a slight outward bend above the tooth (where the tooth engages the bracket teeth). But I noticed the lever on my '49 didn't; it was straight from top to bottom.

Do any of you have a straight governor control lever? Do you think this was a PO modification or factory?
Stanton
Image Circle of Safety

SPONSOR AD

Sponsor



Sponsor
 

lazyuniondriver
10+ Years
10+ Years
Posts: 438
Joined: Tue Aug 07, 2012 1:37 am
Zip Code: 44134
Tractors Owned: 1949 & 1951 Farmall Cubs

Several Snapper Garden Tractors
Circle of Safety: Y
Location: Southern Suburbs of Cleveland, Ohio

Re: Governor Control Lever

Postby lazyuniondriver » Mon Nov 26, 2012 10:21 am

The IHC printed materials from the day indicate the levers have a slight offset. Mine do too.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Image

User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Governor Control Lever

Postby Stanton » Mon Nov 26, 2012 11:22 am

lazyuniondriver wrote:The IHC printed materials from the day indicate the levers have a slight offset. Mine do too.


Yeah, I checked the TC-37 Series Cub Parts Manuals up thru '70 and all show the same diagram; lever with a slight outward bend. Interesting...
Stanton
Image Circle of Safety

tst
10+ Years
10+ Years
Posts: 5189
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Governor Control Lever

Postby tst » Mon Nov 26, 2012 6:10 pm

the factory ones have that bend, I have noticed the aftermarket ones are straight
Tim


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 28 guests