Page 1 of 1
Clutch disk
Posted: Thu Nov 22, 2012 8:04 pm
by Matt Kirsch
Which side of the clutch disk goes toward the flywheel? I forgot which way it came out, and I'd like to make sure it's right before I button the tractor up.
Re: Clutch disk
Posted: Thu Nov 22, 2012 8:10 pm
by cub47
Re: Clutch disk
Posted: Thu Nov 22, 2012 8:13 pm
by cub47
If you have not already, double check you pressure plate finger height adjustment while you have the tractor split.
Re: Clutch disk
Posted: Tue Nov 27, 2012 1:32 pm
by lazyuniondriver
After carrying a cell phone with a camera for a decade now, I finally remember to pull it out and capture anything I intend to disassemble with more than one part.
Since I've begun the practice, I have saved hours of reassembly time on projects I didn't have manuals for.
Re: Clutch disk
Posted: Tue Nov 27, 2012 4:17 pm
by Matt Kirsch
Yup, my mistake... I thought I remembered how it came out, took a shot, and got it wrong.
It only took me about 45 minutes to re-split the tractor, flip the disk over, and put it back together. Now on to the transmission split.
