This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

How to Reupholster a Seat

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

How to Reupholster a Seat

Postby Stanton » Wed May 02, 2012 7:37 am

Had the desire to try my hand at reupholstering the seat for my '48 Cub project.

Items used:
--24"x24"x1" high density foam (JoAnn Fabric Store)
--approx. 1 yd of black canvas material (JoAnn Fabric Store)
--Loctite 300 Professional Spray Adhesive
--smooth jaw channel locks
--electric knife
--0.120 window screen cording (rubber)
--blue tape, marker, ruler and all the other items necessary
--a helpful wife (or friend) who knows how to sew and is your 3rd hand

I purchased the foam, fabric and adhesive over the winter and left them in the plastic bag hanging on the back of a dining room chair for weeks. The foam was rolled up. This actually helped put a curve in the foam, so when I was ready to cut it, it contoured to the pan seat w/o much trouble. I like happy accidents. :) This How-To already assumes you have a Cub seat that has the lip opened up, the old cording and canvas removed, and the seat stripped/painted.

Mark the center line on the foam.

001.JPG

Take the seat and cut two paper patterns out; one for the lower part and one for the upper back. These will represent the contour of the seat. You will notice I marked the center line of the upper and lower paper patterns so they would line up later. I also cut the outside edge of the paper right at the opening of the lip, then when my wife was ready to cut the fabric, she left a couple inches beyond that.

003.JPG

004.JPG

Next, transfer the paper pattern to the foam, lining it up with the center line. I used a Sharpie ink pen. Also decided to keep the upper and lower pieces of foam attached in the mid-section (for stability).

005.JPG

006.JPG

007.JPG

008.JPG


Tape off the lip of the seat--you don't want spray adhesive on it. Then, follow the manufacturer's recommendations of the Loctite 300. The stuff seemed pretty good. I applied 2 or 3 coats to both pan seat and back of foam. My wife provided a 3rd hand to help press the foam to the seat. This spray adhesive warns that touching it together will create a bond that cannot be repositioned. So, be sure to get it right the first time.

009.JPG

011.JPG

After the seat foam sat overnight, I used an electric knife to trim off the excess foam. This picture was taken "mid-trim", so it's not completely trimmed.

013.JPG

My wife did a great job on the canvas. She first used some old fabric and made a mock-up from the paper pattern, so we'd see how it lay. Then, she used the pattern to cut and sew the two pieces of black canvas together. She also marked the center line on the back, especially at the top and bottom of the fabric so we'd have a reference point when pressing it to the foam. Here's the fabric and foam with 2-3 coats of spray adhesive appiled. Again, my wife helped with lining it up and then pressing it in while I held the fabric up away from the foam.

015.JPG

After another day to let it cure, it was time to press the fabric into the lip of the seat. I used rubber window screen cording; the smallest diameter they sold. The purpose of the cording is to provide a physical element within the lip so the fabric can wrap around it. When the lip is pressed shut, the fabric plus the cord prevent the fabric from pulling out of the lip area. I found that the Loctite didn't stick that bad, so was able to lift it up and remove all the blue tape.

017.JPG

018.JPG


A pop sickle stick worked great as a push-stick. It was wide, rounded and blunt. Fortunately, we had two sizes and I used the larger size; about the size of a tongue depresser. Start at the top, back of the seat and gentle push the fabric from the foam side (not the excess fabric side) into the lip opening. By pushing from the foam side, you gently pull the canvas tight over the foam; makes a better appearance without any wrinkles. Don't misunderstand, some of the excess fabric will get pulled down inside the opening, but if you can try to pull from the seat side, I think the end result will be better.

019.JPG


I taped up the smooth jaws on the channel locks, but it still mared the paint. When you have an inch or two section inserted, use the pliers to close the lip. Using this method, work your way around the lip several inches, then switch to the other side of top center and work in that direction. This way, the fabric is evenly pulled around the seat.

020.JPG

021.JPG

022.JPG


When you've completed the whole seat, now comes the hardest part--trimming the excess fabric. I used a narrow blade, steel paint scraper as a shield against the good fabric and pressed it down as far as I could. Then, I used a couple of cutting tools--X-acto knife and single edge razor blade. The razor blade seemed to cut better, but had to use a couple due to cutting against the metal dulls the edge/corner of the blade. So, use new, very sharp blades because the canvas is tough and difficult to cut.

023.JPG

With a lot of patience, the finished result.

024.JPG

The seat turned out really nice and I was very pleased. I'd like to thank DustyB for sharing some pictures and advice on his seat reupholstry job. That gave me the confidence to try this. Hope this helps if you decide to tackle it yourself. Probably do this again for my '47 Circle Cub.
Stanton
Image Circle of Safety

SPONSOR AD

Sponsor



Sponsor
 

Billy Fussell
10+ Years
10+ Years
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: How to Reupholster a Seat

Postby Billy Fussell » Wed May 02, 2012 7:49 am

Good Job! Looks great. Wish I had patience to do stuff like that.

Billy

User avatar
Dusti Snider
10+ Years
10+ Years
Posts: 601
Joined: Tue Feb 04, 2003 9:10 am
Zip Code: 24739
Tractors Owned: 1951 Farmall "M" - Restored
1949 Farmall Cub - Original "Blue Ribbon Reconditioned"
1953 Farmall Super AI
1934 Farmall F-12
1929 Farmall Regular
1956 Ford 640
1972 Ford 4000
Circle of Safety: Y
Location: Mercer County, West Virginia

Re: How to Reupholster a Seat

Postby Dusti Snider » Wed May 02, 2012 8:30 am

WOW! This thread has to be a "sticky" somewhere! Great Job!!!!

You and your wife make quite a team!!!!
Image

Member IHCC Chapter 37 & 42 - North Carolina

ScottyD'sdad
Cub Pro
Cub Pro
Posts: 7500
Joined: Thu Aug 31, 2006 7:00 pm
Zip Code: 02769
Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator
Circle of Safety: Y
Location: Ma. Rehoboth

Re: How to Reupholster a Seat

Postby ScottyD'sdad » Wed May 02, 2012 8:37 am

Nice "how To". Now, IF I could talk myself into trying it.... Ed
Image
Member of Chapter 18, and National
Circle of Safety

User avatar
Barnyard
Team Cub
Team Cub
Posts: 24233
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:

Re: How to Reupholster a Seat

Postby Barnyard » Wed May 02, 2012 8:49 am

Dusti Snider wrote:WOW! This thread has to be a "sticky" somewhere! Great Job!!!!

You and your wife make quite a team!!!!

This will be copied and locked in the How To forum (as is procedure for all How To's). The original will remain here for comments.

By the way, Great Job!
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety

Bill E Bob
10+ Years
10+ Years
Posts: 3034
Joined: Wed May 31, 2006 12:09 pm
Zip Code: 74070
Circle of Safety: Y
Location: OK, Skiatook

Re: How to Reupholster a Seat

Postby Bill E Bob » Wed May 02, 2012 9:04 am

Another example of "Elegant Engineering" Your abilities (and your wife's) are amazing :shock:

User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 7805
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: How to Reupholster a Seat

Postby Mike in Louisiana » Wed May 02, 2012 9:13 am

That realy looks good.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers

User avatar
raystractors
10+ Years
10+ Years
Posts: 363
Joined: Wed Aug 31, 2011 11:55 am
Zip Code: 37058
Tractors Owned: 1950 Cub, 1952 Cub, 1970 Cub, 1975 Cub, 1953 Cub, 1939 A, 1948 super A, 1952 super A, 1950 C demonstrator, 1952 Super C, 1949 H, 1956 farmall 300, 1957 international 350, 1963 Massey Ferguson 35
Circle of Safety: Y
Location: TN Dover

Re: How to Reupholster a Seat

Postby raystractors » Wed May 02, 2012 11:01 am

That is really a great how to. I wish that I had that kind of talent, to me if you do it yourself it has more worth than if you buy it. I have made a copy of this post, and put it in pdf form so I could print it if I ever get the time to try this. I tried to attach the file but it would not load, file size is to large, 463 kbs. If anyone would like a copy, send me a pm and I can email it to you.

User avatar
k9sicem
10+ Years
10+ Years
Posts: 339
Joined: Tue Sep 14, 2010 10:10 pm
Zip Code: 52002
Tractors Owned: 1960 LoBoy named "Verona"
1930 Ford Model A street rod named "Half Fast"
1939 Chevy 1/2 ton truck named "Stella"
1954 Chevy 1/2 ton truck named "Ester"
Circle of Safety: Y
Location: Dubuque, Iowa

Re: How to Reupholster a Seat

Postby k9sicem » Wed May 02, 2012 12:11 pm

Nice job. The photos really help. My wife is a quilter so with hre help I may try this on my 49.
"Always start out the way you want to end up"
Grandpa Franke

Jason (IL)
10+ Years
10+ Years
Posts: 916
Joined: Sun Feb 02, 2003 10:44 pm
Zip Code: 60936
Tractors Owned: 47 Cub SN 8664
48 Cub
50 Demo
54 Cub
3-55 Cub
2-56 Cub
55 LOBOY SN 876
57 LOBOY
58 French Cub
2- 60 LOBOY
69 Cub
54 Super M
42 H
48 H
57 300LP
57 450
Cub Cadet 123
Cub Cadet 149
Circle of Safety: Y
Location: Gibson City, IL
Contact:

Re: How to Reupholster a Seat

Postby Jason (IL) » Wed May 02, 2012 12:48 pm

Very cool, always wondered how it was done. I will try it on a seat or two this summer.

Good info.

redfin
Cub Pro
Cub Pro
Posts: 4259
Joined: Mon Dec 17, 2007 6:25 pm
Zip Code: 70737
Circle of Safety: Y
Location: LA, Gonzales

Re: How to Reupholster a Seat

Postby redfin » Wed May 02, 2012 4:08 pm

Very nice job. Ranks up near the top for an awesome job , in my opinion :D

User avatar
Winfield Dave
10+ Years
10+ Years
Posts: 3555
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough.
N3NIK
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: How to Reupholster a Seat

Postby Winfield Dave » Wed May 02, 2012 5:53 pm

:thumbsup: :thumbsup:
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

Gary Dotson
Team Cub Mentor
Team Cub Mentor
Posts: 5609
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: How to Reupholster a Seat

Postby Gary Dotson » Thu May 03, 2012 7:12 am

Very nice!! Not only the job on the seat but the narrative as well. Another great how to!

User avatar
Dale Finch
10+ Years
10+ Years
Posts: 6634
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: How to Reupholster a Seat

Postby Dale Finch » Thu May 03, 2012 7:24 am

raystractors wrote:That is really a great how to. I wish that I had that kind of talent, to me if you do it yourself it has more worth than if you buy it. I have made a copy of this post, and put it in pdf form so I could print it if I ever get the time to try this. I tried to attach the file but it would not load, file size is to large, 463 kbs. If anyone would like a copy, send me a pm and I can email it to you.


I would appreciate a copy of this, if you would, and thanks! flya737@aol.com

Stanton, GREAT job...neeeext...me...me!!!
Dale Finch
Image
Circle of Safety

User avatar
Bill Hudson
Team Cub
Team Cub
Posts: 9513
Joined: Wed Jul 26, 2006 10:50 am
Zip Code: 44057
Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe
Circle of Safety: Y
Location: OH, Madison

Re: How to Reupholster a Seat

Postby Bill Hudson » Thu May 03, 2012 7:48 am

Great job! Thank you.

Bill
Bill

"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist

Image
Member of Ohio Chapter #6


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 27 guests