Hydraulic question

[jlcross81]

I am rebuilding my tuch control hydraulics and the shaft that that fits in the housing that contrals the depth only had one o ring on it but it looked like there should be some more o-rings. The manuals I have and the pictures on the internet I have found really don't look the same can anyone help??? Thanks

[beaconlight]

It's amazing what 1 o ring can do. My log spliter has only 1 too. It is about 4 inch in diamater. I can't help on the touch control. Never had to take mine apart.

Bill

[Rudi]

JL:

Go to the Cub Manual Server, then click on Cub Maintenance Manuals, then click on Cub Touch Control Manual. That should help you out.

You can also check Blue Ribbon Service Manuals and click on GSS-1024 Touch Control Manual.

Also, you can check Cub Parts Manuals and click on TC-37F then click on Group 10 - Hydraulics.

Between all of these, your questions should be answered.

I also have 2 other Touch Control Manuals which should be uploaded to the server as soon as I can.

Hope this helps

[John *.?-!.* cub owner]

Yup, there is only one.

[jlcross81]

it looks like there would be more to control te direction of the fluid when you move the valve in and out??