This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

What a cub really needs!

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
Jim Hudson
10+ Years
10+ Years
Posts: 1224
Joined: Sun Feb 02, 2003 1:11 pm
Zip Code: 28001
Location: Albemarle, North Carolina 28001

Postby Jim Hudson » Fri Mar 18, 2005 1:40 am

With the teeth in the ground and a box full of dirt you can lift the front end if you lift it all at once. But lifting just a little for spreading it does ok. I'm looking for some of the split weights for the inside of the front wheels. And when I do any serious dirt moving I will have the 54A blade on the front. That should hold it down ok.
Young man for work, old man for advice
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
WKPoor
10+ Years
10+ Years

Postby WKPoor » Fri Mar 18, 2005 1:51 am

I've excavated for my building and a 100 by 60 gravel area with a 6 footer box blade behind the H and it played with it. With 1200lbs. of wheel weights for traction I could pull the box to china. I would have to lift to stop the draft or it would spill out the top before the end of the pass.
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: staninlowerAL and 27 guests