Front Cultivator Question

[Spirit]

In order to install front cultivators on a cub(hydraulic lift),what do I need, besides tool bars,shanks and clamps. Is a universal mtg. frame and 2 pressure rods all? I looked at the 144 manual it shows the hand lift and front rockshaft etc. (I think) Thanks Spirit

[Jim Becker]

The master lift package and front rockshaft are only needed if you have no hydraulics. You need universal mounting frames with the pressure rods that link them to the hydraulic rock shaft, tool bars and whatever working tools to go on the tool bars.

The rears are another story. With enough tools on the front and depending on your situation, the back section is optional.

Here is a picture from TM Tractors. All you need are the parts without the nice paint. This example is a little light on tools for doing without a rear section.

[Spirit]

Thanks Jim; That's what I needed to know before bidding on e-bay or buying a set elsewhere. Thanks Again....Spirit

[Rudi]

Spirit:

Here is the manual : Cub-144 Cultivator Owner's Manual.