This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
The Cub from Argentina (Clutch info needed)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Re: The Cub from Argentina (Clutch info needed)
Very nice job!
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
-
- 5+ Years
- Posts: 284
- Joined: Wed Jul 16, 2014 8:07 am
- Zip Code: 46628
- Tractors Owned: 55 cub, 54a blade, (2) woods L59 mower...Allis Chalmers CA
1965 International 140, 60" grader blade. - Circle of Safety: Y
- Location: Northern Indiana
Re: The Cub from Argentina (Clutch info needed)
Great Job!!
I reread the entire post to catch up. It has taken some time to get where you are at, and you must be proud! And by the smile on your face in the video you're having fun doing it.
I can only imagine trying to get parts in another country, and it was nice to see the guys on this forum could help you out. They're the best!
Good Luck and keep us updated.
Bruce.
I reread the entire post to catch up. It has taken some time to get where you are at, and you must be proud! And by the smile on your face in the video you're having fun doing it.
I can only imagine trying to get parts in another country, and it was nice to see the guys on this forum could help you out. They're the best!
Good Luck and keep us updated.
Bruce.
-
- 10+ Years
- Posts: 54
- Joined: Wed Mar 23, 2011 10:00 am
- Zip Code: 5889
- Skype Name: nicolashayes
- Tractors Owned: 1952 Farmall Cub
- Location: Ascochinga, Cordoba, Argentina.
- Contact:
Re: The Cub from Argentina
Thanks very much.
Here some more pictures, i just need to apply the decals that i have..
Here some more pictures, i just need to apply the decals that i have..
-
- 10+ Years
- Posts: 54
- Joined: Wed Mar 23, 2011 10:00 am
- Zip Code: 5889
- Skype Name: nicolashayes
- Tractors Owned: 1952 Farmall Cub
- Location: Ascochinga, Cordoba, Argentina.
- Contact:
Re: The Cub from Argentina (Clutch info needed)
Hello !
its has been a while since my last post, i have been repairing the hydraulics, because had a leak in the pump, and the hyd oil was going to the crankcase.. i put a lip seal in the axle of the pump and no more problem..
i will show you a video of how the tractor was starting after 4 months of no use, after finally started and was running like normal i took a 2h ride to the gas station and no more problem after that..
Could you tell me if the weird sound is from a 3 cylinder running engine or stuck valve??
Now i need to get a mower and build a battery box.
its has been a while since my last post, i have been repairing the hydraulics, because had a leak in the pump, and the hyd oil was going to the crankcase.. i put a lip seal in the axle of the pump and no more problem..
i will show you a video of how the tractor was starting after 4 months of no use, after finally started and was running like normal i took a 2h ride to the gas station and no more problem after that..
Could you tell me if the weird sound is from a 3 cylinder running engine or stuck valve??
Now i need to get a mower and build a battery box.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: The Cub from Argentina (Clutch info needed)
By listening and knowing it's history I would suspect sticking valve.
You are the only person I know that is slower on repair than I am. It has taken me over 5 months to replace the rear axle seals and paint a cub.
You are the only person I know that is slower on repair than I am. It has taken me over 5 months to replace the rear axle seals and paint a cub.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Glen
- 10+ Years
- Posts: 6146
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: The Cub from Argentina (Clutch info needed)
Hi,
Nice looking Cub in your pictures.
Below is a listing at TM Tractor for a new battery box, if you want to see it. This is how the IH battery box looked.
http://www.tmtractor.com/new/el/5721fp.htm
I don't know if you have a drawbar for the Cub, it is needed to pull something behind the Cub.
Here are pages from the Cub owner's manual showing one.
http://farmallcub.com/rudi_cub/www.clea ... e%2042.jpg
http://farmallcub.com/rudi_cub/www.clea ... e%2043.jpg
Below are pics of one from TM Tractor.
http://www.tmtractor.com/tm-tractor/gdr/drbar_001.htm
It also needs the tapered head IH style bolts to hold it onto the final drives. Here is a listing showing those.
http://www.tmtractor.com/new/gb/324fp.htm
Nice looking Cub in your pictures.
Below is a listing at TM Tractor for a new battery box, if you want to see it. This is how the IH battery box looked.
http://www.tmtractor.com/new/el/5721fp.htm
I don't know if you have a drawbar for the Cub, it is needed to pull something behind the Cub.
Here are pages from the Cub owner's manual showing one.
http://farmallcub.com/rudi_cub/www.clea ... e%2042.jpg
http://farmallcub.com/rudi_cub/www.clea ... e%2043.jpg
Below are pics of one from TM Tractor.
http://www.tmtractor.com/tm-tractor/gdr/drbar_001.htm
It also needs the tapered head IH style bolts to hold it onto the final drives. Here is a listing showing those.
http://www.tmtractor.com/new/gb/324fp.htm
-
- 5+ Years
- Posts: 1623
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: The Cub from Argentina (Clutch info needed)
Saludos de CT. He visto su video, buen trabajo. Is that a deux-chevaux from France in your barn? Nice job on the cub.
Who is online
Users browsing this forum: No registered users and 53 guests