Manifold studs
Moderator: Team Cub
8 posts
• Page 1 of 1
Manifold studs
by Dusty B » Wed Jan 25, 2012 10:44 am
Any suggestions for the best/easiest way to remove manifold studs?? Dusty B
Grandpa's '41 B
'56,,'57,'59,'71 Cub
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'48 DeSoto
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59,'71 Cub
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'48 DeSoto
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
-
Dusty B - 501 Club
- Posts: 1183
- Joined: Wed May 23, 2007 7:35 am
- Location: IL, Downs
- Zip Code: 61736
- Tractors Owned: '45 SC Case
Fairbanks-Morse Generator 
- Circle of Safety: Y
Re: Manifold studs
by John *.?-!.* cub owner » Wed Jan 25, 2012 12:28 pm
screw 2 regular (not manifold) nuts on the stud, the use 2 wrenches to lock them together good and tight, then put wrench on one closest to engine and back the stud out. If that doesn't work, the next step is to buy or borrow a stud extractor.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
-
John *.?-!.* cub owner - Team Cub
- Posts: 17777
- Joined: Sun Feb 02, 2003 2:09 pm
- Location: Mo, Potosi
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Re: Manifold studs
by ScottyD'sdad » Wed Jan 25, 2012 4:10 pm
Could try welding a nut to the end, like we do with broken head bolts. The heat may help loosen it, too. Ed
50 ,52,53,56,59 F Cubs, 55,55,57,63,63 fast hitch, 64 lo-boys, 71 154, 184 lo-boy,61 cadet original. IH spreader,IH corn grinder, Oli. OC3 ,AC D10 ,IH 444 , Potato digger, wagner ldr 3 power units.
- ScottyD'sdad
- Cub Pro
- Posts: 4563
- Joined: Thu Aug 31, 2006 7:00 pm
- Location: Ma. Rehoboth
- Zip Code: 02769
- Circle of Safety: Y
Re: Manifold studs
by Barnyard » Wed Jan 25, 2012 4:23 pm
Dusty, a little more info is needed. Are these broken studs? If so is any of the stud sticking out or is it broke below the surface? The two suggestions given are good ones, but they are for two different situations. If broken below the surface you may have to drill them out. If that is the case then a left hand drill bit might do the trick.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15744
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: Manifold studs
by Dusty B » Wed Jan 25, 2012 8:39 pm
OK guys - used a little of everything! One came w/heat & freeze release, twisted 2nd one off, wound up drilling it out and retapping, 3rd one came w/heat, freeze release and stud remover!! At least all of them are out - take it in to be boiled out tomorrow. Have help coming Sat. AM to determine just where I need to go w/bearings & rings! YAHOO !! STARTING THE OTHER WAY W/IT!! Who knows - just might have it running by Cubtug time! Thanks for all the tips! Have to start putting it back together, my "parts wall" is getting filled up!
- Attachments
-
- IMG_2878.jpg (35.69 KiB) Viewed 240 times
Grandpa's '41 B
'56,,'57,'59,'71 Cub
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'48 DeSoto
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59,'71 Cub
'51 Super C
'55 Case SC
Fairbanks-Morse 3KW Generator
Dad's DB garden tractor
'48 DeSoto
'31 "A Coupe
'51 Ford PU
'55 Dodge PU
God looks out for those of us who don't know how to look out for ourselves!
-
Dusty B - 501 Club
- Posts: 1183
- Joined: Wed May 23, 2007 7:35 am
- Location: IL, Downs
- Zip Code: 61736
- Tractors Owned: '45 SC Case
Fairbanks-Morse Generator - Circle of Safety: Y
Re: Manifold studs
by Pickerincal » Sat Dec 29, 2012 4:32 pm
Anyone know where I can get new studs? I've already twisted one off and the rest are just as stubborn. Figure new ones would be better anyway.
Btw... they're going into a new rebuilt engine
Btw... they're going into a new rebuilt engine
- Pickerincal
- Posts: 37
- Joined: Sat Jun 23, 2012 11:42 pm
- Zip Code: 93455
- Tractors Owned: 1947 Cub
1967 Cub Cadet
1972 Loadstar 1600 - Circle of Safety: Y
Re: Manifold studs
by Barnyard » Sat Dec 29, 2012 4:37 pm
Pickerincal wrote:Anyone know where I can get new studs? I've already twisted one off and the rest are just as stubborn. Figure new ones would be better anyway.
Btw... they're going into a new rebuilt engine
A good parts house should be able to fix you up.
I don't believe in taking the bull by the horns. I took a goat by the horns once and that was enough excitement for me.
Barnyard Bash CubFest May 31 - June 1, 2013
Click here for info.
-
Barnyard - Team Cub
- Posts: 15744
- Joined: Tue Aug 07, 2007 3:39 pm
- Location: OH, New Haven (Hamilton County)
- Zip Code: 45030
- Tractors Owned: At This Time
32 Farmall Cubs (Round Hood)
1 Farmall Cub (Square Hood)
2 IH Cubs 9Square Hood
4 Lo-Boys (Round Hood)
1 Lo-Boy (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
Re: Manifold studs
by Eugene » Sat Dec 29, 2012 5:06 pm
Auto parts store. They should have some with two different diameter ends, just in case you have to drill out one and then retap to a larger diameter.Pickerincal wrote:Anyone know where I can get new studs?
I have an excuse. CRS.
- Eugene
- Cub Pro
- Posts: 10927
- Joined: Fri Jul 02, 2004 9:52 pm
- Location: Mo. Linn
- Zip Code: 65051
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: Dale Finch, Winfield Dave and 7 guests
|
|