Still disassembling the '47 cub. The governor small spring was broken but the kind folks on this site quickly indicated where I could get one. Great site.
The small three-part thrust bearing on on internal governor shaft needed to be replaced as well. It is #43481D in the parts catalog. Ebay had one for $29 with shipping. Arriving today was NICE 5971JBF03. The NICE product may be easier to find and/or cheaper. So:
Farmall 43481D = NICE 5971JBF03
Hope this can help someone out in the future.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Governor Thrust Bearing Replacement
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 73
- Joined: Sun Apr 20, 2008 9:30 pm
- Zip Code: 55082
- Circle of Safety: Y
- Location: Stillwater, Minnesota
- RaymondDurban
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Governor Thrust Bearing Replacement
Thanks for the info! Fitment good?
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Governor Thrust Bearing Replacement
NICE is part of RBC and are an old company, they should be ok.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 250
- Joined: Sun Aug 22, 2010 8:10 pm
- Zip Code: 46112
- Tractors Owned: 47' Cub
49' H
55' 300U
47' Oliver 70 Row Crop
Mott mower
cultivators
#8 2-14 Little Genius Plow - Location: Brownsburg, IN
Re: Governor Thrust Bearing Replacement
I have my governor apart too. I guess I should replace since it is apart. Mine is in three (3) pieces. I trust this is the way it is supposed to be?
- AL Farmall Boy
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Governor Thrust Bearing Replacement
I realize this is an old post, but would anyone know how you could cross the IH part number or the NICE part number to another brand bearing. Either that, or know where I could buy a NICE bearing. I've tried searching Google and haven't came up with very much. I'm looking at buying 8 or 10 of these and at $50 each on the Tractor Parts sites, it gets very expensive.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Governor Thrust Bearing Replacement
those do not go bad very often AL, I would make sure I needed them before stocking up on too many of them.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- AL Farmall Boy
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Governor Thrust Bearing Replacement
Will do, but just thought it would be good to have some on hand as they seem like they are hard to find other than the tractor parts suppliers.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Governor Thrust Bearing Replacement
I have had a new one in my spare parts drawer for 10 years or more. Make that nearer to 15 years. I was doing a complete end to end refurbish on one and ordered it along with all the seals and a couple bearings I knew I needed, and figured I might need the thrust bearing. Turned out the problem on that particular governor was the fingers that push against the bearing inside the housing was broken.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 9
- Joined: Wed Mar 21, 2012 3:30 pm
- Zip Code: 50421
Re: Governor Thrust Bearing Replacement
IHC 43481D Ball bearing IHC 43481D Array
IHC 55314D Ball bearing IHC 55314D Array
IHC 755948R91 Ball bearing IHC 755948R91 Array
NSN 3110-00-275-0040 Ball bearing NSN 3110-00-275-0040 Array
ABC N1117 Ball bearing ABC N1117 Array
NICE 5971 Ball bearing NICE 5971 Array
NICE N1117 Ball bearing NICE N1117 Array
Aetna Bearing 5971 Ball bearing Aetna Bearing 5971 Array
Aetna Bearing A2005 Ball bearing Aetna Bearing A2005 Array
CASE IH 55314D Ball bearing CASE IH 55314D Array
IHC 55314D Ball bearing IHC 55314D Array
IHC 755948R91 Ball bearing IHC 755948R91 Array
NSN 3110-00-275-0040 Ball bearing NSN 3110-00-275-0040 Array
ABC N1117 Ball bearing ABC N1117 Array
NICE 5971 Ball bearing NICE 5971 Array
NICE N1117 Ball bearing NICE N1117 Array
Aetna Bearing 5971 Ball bearing Aetna Bearing 5971 Array
Aetna Bearing A2005 Ball bearing Aetna Bearing A2005 Array
CASE IH 55314D Ball bearing CASE IH 55314D Array
Who is online
Users browsing this forum: Mcdaniel2903 and 20 guests