This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
George Willer
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Jim Hudson
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
George Willer
George you got me to looking around and I found this today. The chain was off and would not stay on, then I trued up the wobble in the big sprocket and put on a new chain. Engine started right up and ran fine. $100
Young man for work, old man for advice
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
Jim,
That looks just like one I saw in the flea market at Wellington, OH a couple years ago. Nifty little compact unit. I made a note to go back later and try to haggle, but I got sidetracked and forgot. I think he was asking $75... would have been a steal.
That looks just like one I saw in the flea market at Wellington, OH a couple years ago. Nifty little compact unit. I made a note to go back later and try to haggle, but I got sidetracked and forgot. I think he was asking $75... would have been a steal.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
- John Niekamp
- 10+ Years
- Posts: 757
- Joined: Tue Apr 06, 2004 9:41 pm
- Zip Code: 62301
- eBay ID: jniekamp66
- Location: Quincy, IL
Yes Jim,
Those don't work to bad at all, especially over a splitting mall I have one almost just like it. I'm thinking it has a 5 horse Briggs engine on it. I think that's what I gave for mine. My sprocket cover is missing. It may be slower than a hydraulic systems, but better than breaking ones back.
John Niekamp
Those don't work to bad at all, especially over a splitting mall I have one almost just like it. I'm thinking it has a 5 horse Briggs engine on it. I think that's what I gave for mine. My sprocket cover is missing. It may be slower than a hydraulic systems, but better than breaking ones back.
John Niekamp
- Jim Hudson
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
- John Niekamp
- 10+ Years
- Posts: 757
- Joined: Tue Apr 06, 2004 9:41 pm
- Zip Code: 62301
- eBay ID: jniekamp66
- Location: Quincy, IL
-
- Cub Pro
- Posts: 2575
- Joined: Mon Feb 03, 2003 5:25 am
- Zip Code: 37774
- Tractors Owned: 1948 McCormick-Deering Farmall Cub
152 Disc Plow & Flat Belt Pulley
Brinly #8 Moldboard Plow
1971 JD 112 Garden Tractor
1928 Economy Hit & Miss Engine
1927 David Bradley "Little Wonder" Feed Grinder
1 A.H. Patch Corn Shellers
1 A.H. Patch #1 Grist Mill - Circle of Safety: Y
- Location: TN, Loudon (near Knoxville)
Well...I may be just a dumb ol' country boy, BUT I prefer walkin' up to my brick hearth...and pressin' the switch on my Vermont Casting gas stove . NO cuttin'...NO cussin'...NO splittin'...NO stackin'...NO bad backin'....JUST GOOD OL' U.S.A. MADE & DELIVERED PROPANE ! Sometimes it gits SO WARM, IN SUCH A SHORT TIME...I have to git back up outta my EXTRA-WIDE leather Laz-E-Boy and SHUT HER DOWN ! I've often thought about switchin' the gas stoves (the one in the lower level HAS A REMOTE CONTROL) !!!
"Save The Possums...Collect The Whole Set"
"Tennessee Sun-Dried Possum...Heaven In A Can"
"Tennessee Sun-Dried Possum...Heaven In A Can"
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
- Jim Hudson
- 10+ Years
- Posts: 1224
- Joined: Sun Feb 02, 2003 1:11 pm
- Zip Code: 28001
- Location: Albemarle, North Carolina 28001
-
- 10+ Years
- Posts: 227
- Joined: Mon Feb 03, 2003 9:42 am
- Zip Code: 71303
- Tractors Owned: 1-69 Cub
5- Cub Cadets - Location: Alexandria, La.
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
moe1942 wrote:Jim,
Forgive my ignorance, but what keeps the log from turning once the screw gets a good bite. A piece of white oak would turn you every way but loose if you were holding onto it..
Have seen those screw splitters for years but never saw one in use.
Moe,
That's the purpose for the rod or pipe that is parallel to the splitting screw. The screw is started somewhere near one end of the wood and then you can just stand back and watch while the wood is held from turning by the pipe. Unlike a hydraulic splitter you don't have to wait for anything to return to the beginning... it's ready for the next piece.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 38
- Joined: Sun Feb 02, 2003 8:03 pm
- Location: MS, Yazoo City
George Willer wrote:The screw is started somewhere near one end of the wood and then you can just stand back and watch while the wood is held from turning by the pipe.
Do you feed the wood end-wise like a hydraulic splitter, or on the bark side?
BillWms01
'48 Cub, Woods 42C Mower, Cub-144 Cultivators, Cub-22 Mower, Disc Breaking Plow, Belt-Drive for PTO.
'48 Cub, Woods 42C Mower, Cub-144 Cultivators, Cub-22 Mower, Disc Breaking Plow, Belt-Drive for PTO.
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
BillWms01 wrote:George Willer wrote:The screw is started somewhere near one end of the wood and then you can just stand back and watch while the wood is held from turning by the pipe.
Do you feed the wood end-wise like a hydraulic splitter, or on the bark side?
Bill,
Sorry I didn't make that clear. The screw is started cross grain... from the bark side.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 38
- Joined: Sun Feb 02, 2003 8:03 pm
- Location: MS, Yazoo City
George Willer wrote: The screw is started cross grain... from the bark side.
OK, now it's a lot clearer. I always thought those things went in just like a wedge! I guess it's a good thing I never had one, or I'd probably be cussing it, wondering why it didn't work! Come to think of it, maybe that's why you lucky guys are finding these things so cheap!
BillWms01
'48 Cub, Woods 42C Mower, Cub-144 Cultivators, Cub-22 Mower, Disc Breaking Plow, Belt-Drive for PTO.
'48 Cub, Woods 42C Mower, Cub-144 Cultivators, Cub-22 Mower, Disc Breaking Plow, Belt-Drive for PTO.
-
- 10+ Years
- Posts: 2338
- Joined: Sat Apr 10, 2004 6:12 pm
- Zip Code: 40218
- Circle of Safety: Y
- Location: KY, Louisville
Country
You are missing out on all the warmth you get from wood - you get warm when you cut it, you get warm when you split it, and you get warm when you burn it. But I'm kinda like you, I just prefer to use the thermostat on the wall myself.....never did like mixing oil and gas for a chain saw, and never could find the starter button on a wedge and splittin' maul Only downside to my way is it can get a might chilly if the power goes out
You are missing out on all the warmth you get from wood - you get warm when you cut it, you get warm when you split it, and you get warm when you burn it. But I'm kinda like you, I just prefer to use the thermostat on the wall myself.....never did like mixing oil and gas for a chain saw, and never could find the starter button on a wedge and splittin' maul Only downside to my way is it can get a might chilly if the power goes out
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
We heat by wood and here are a couple reasons why.
I own the wood (it is in my woodlot)
Costs me about $200.00/year to heat my house - 3 floors - 1200sq ft per floor - 3600 sq ft total. Top two floors of 9600 cu ft each plus the basement with 1200 cubic feet (10 foot to underside of joists - don't ask ) - which is 31,200 cubic feet
Moist heat, nothing dries out and the humidity is a nice 50%-60%.
No stinky foul smoking exhaust cause it ain't tuned properly delivery truck for propane or oil.
No stink from oil.
And my electricity bill is affordable.
I figure, 2 or 3 days of family togetherness hauling, splitting, haulin and pilin is worth the savings. Besides it is a lot of fun!
I own the wood (it is in my woodlot)
Costs me about $200.00/year to heat my house - 3 floors - 1200sq ft per floor - 3600 sq ft total. Top two floors of 9600 cu ft each plus the basement with 1200 cubic feet (10 foot to underside of joists - don't ask ) - which is 31,200 cubic feet
Moist heat, nothing dries out and the humidity is a nice 50%-60%.
No stinky foul smoking exhaust cause it ain't tuned properly delivery truck for propane or oil.
No stink from oil.
And my electricity bill is affordable.
I figure, 2 or 3 days of family togetherness hauling, splitting, haulin and pilin is worth the savings. Besides it is a lot of fun!
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: No registered users and 43 guests