This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Electrolysis Tank Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
JB = for some reason your host site does not want to direct link. Once I used the properties to find the address of the photo it would show. So I swiped a copy of your pic from your site and copied it to my photo host.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Bigdog wrote:JB = for some reason your host site does not want to direct link. Once I used the properties to find the address of the photo it would show. So I swiped a copy of your pic from your site and copied it to my photo host.
Sumpin weird going on here B.D. Now on this trip back to the board hours later my picture is showing up again. On my last visit all that showed was a small blank square. I have noticed that happening ocasionally on pictures that others have posted, Sometimes they appear and other times they are a blank box.
Then came Bronson
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
JB - a lot of sites limit the amount of traffic or bandwidth you can use for given time periods. When you exceed that usage, they block your page for a while. That is probably what is happening.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
Bigdog wrote:JB - a lot of sites limit the amount of traffic or bandwidth you can use for given time periods. When you exceed that usage, they block your page for a while. That is probably what is happening.
Why them dirty rotten low-down •¾½)(*%¿?## scoundrels, I would fire them if they weren`t providing me with free space.
Then came Bronson
-
- 10+ Years
- Posts: 153
- Joined: Sat Jun 23, 2012 11:42 pm
- Zip Code: 93455
- Tractors Owned: 1947 Cub
1967 Cub Cadet
1972 Loadstar 1600 - Circle of Safety: Y
Re: Electrolysis Tank Question
Will the process still work if the part is laying on the bottom? I'm thinking it just can't touch the positive and it would be ok.
I want to use a kiddie pool for larger items like rims so they would just be laying on the bottom.
Thanks
Brian
I want to use a kiddie pool for larger items like rims so they would just be laying on the bottom.
Thanks
Brian
-
- Team Cub
- Posts: 17309
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Electrolysis Tank Question
Yes it will work with the part resting on the bottom of a non-metallic container. It will not work very well on the portion of the part that is resting directly against the container. Depending on the part being cleaned, it may help to flip the part the other side up after a while.
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Re: Electrolysis Tank Question
I've used a kiddie pool a couple of times. if you place a small block of wood under the rim in three spots, it works well. you either zip tie the wood on the rim, or put your hand in the solution to place them. I've also used a large tote from wall mart and rotated the rims vertically
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Need help with Electrolysis tank. Attachment(s)
by RogerW » Sun Jul 03, 2022 2:58 pm » in Farmall Cub - 14
- 212
-
by Rick Spivey
Mon Jul 04, 2022 6:28 pm
-
-
- 5
- 318
-
by SamsFarm
Thu Sep 29, 2022 9:01 am
-
-
My new electrolysis tank not bubbling off rust Attachment(s)
by Stevetractor » Wed Jan 05, 2022 11:33 am » in Farmall Cub - 9
- 552
-
by Stevetractor
Thu Jan 06, 2022 5:01 am
-
-
- 3
- 228
-
by 5 Forward
Fri Jun 03, 2022 8:20 pm
-
- 25
- 501
-
by Magnum
Wed Jul 27, 2022 9:09 pm
Who is online
Users browsing this forum: No registered users and 2 guests