While trying to set up my front mount blade I got some great help from some of you. For that thank you very much. It has occurred to me that I need to install new bushings in some of the linkage connections. Are these bushings easy to obtain for parts stores or do I need to special order from somewhere?
Thanks
Mike
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Shims/Bushings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 28
- Joined: Wed Dec 22, 2004 8:09 am
- Location: missouri, O'Fallon
-
- 10+ Years
-
- 10+ Years
- Posts: 908
- Joined: Sat Feb 15, 2003 7:20 am
- Zip Code: 00000
- Contact:
mwilke,
It appears you live close to me. If you need to take a look at my blade set up, you’re more than welcome. It’s not on the tractor, but in my storage area. I also have many other implements for a Cub if you ever need to take a look at or help setting them up.
I’m out of town until next week, but if you need any help after that, e-mail me.
Jack Fowler
It appears you live close to me. If you need to take a look at my blade set up, you’re more than welcome. It’s not on the tractor, but in my storage area. I also have many other implements for a Cub if you ever need to take a look at or help setting them up.
I’m out of town until next week, but if you need any help after that, e-mail me.
Jack Fowler
Who is online
Users browsing this forum: No registered users and 46 guests