This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
First time plowing snow, it was not pretty
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- spaceghost
- 10+ Years
- Posts: 756
- Joined: Wed Jun 23, 2004 8:19 am
- Zip Code: 02346
- Tractors Owned: 1959 Cub lo-boy
1950 super A - Location: Middleboro MA usa
First time plowing snow, it was not pretty
It is snowing in south east MA at this very moment.
My cheeks are cold and my butt is wet.
My 58 Lo-boy did not push the snow well at all.
I have about 400 feet of flat drive way and the cub slipped and skidded the whole way.
Only about 3 in of snow on the ground. A small pile would build up on the blade and
I could not go any further. I finally gave up with a very messy looking plow job.
I guess I need some tire chains and wheel weights.
My tires are 13.6 X 16 they are wider than the blade so that does not help any.
I guess I will call the case IH dealer in the morning to try to get some chains.
Does anyone know a better place to get some tire chains?
Does anyone have any wheel weights in New England that they would want to sell?
This is a terrible moment in my life. Why didn’t Santa bring me some tire chains for Christmas? I hope his slay is stuck in the snow.
My cheeks are cold and my butt is wet.
My 58 Lo-boy did not push the snow well at all.
I have about 400 feet of flat drive way and the cub slipped and skidded the whole way.
Only about 3 in of snow on the ground. A small pile would build up on the blade and
I could not go any further. I finally gave up with a very messy looking plow job.
I guess I need some tire chains and wheel weights.
My tires are 13.6 X 16 they are wider than the blade so that does not help any.
I guess I will call the case IH dealer in the morning to try to get some chains.
Does anyone know a better place to get some tire chains?
Does anyone have any wheel weights in New England that they would want to sell?
This is a terrible moment in my life. Why didn’t Santa bring me some tire chains for Christmas? I hope his slay is stuck in the snow.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
try http://www.tirechains.com - they have good prices and a good product. Is your blade surface rusty? If it is, snow will stick to it. A quick sanding and coat of paint will help. I have heard of others who spray the blade with non-stick cooking spray or silicone lubes to aid in this problem.
If you have a Tractor Supply Company store in your area, they should also have chains.
If you have a Tractor Supply Company store in your area, they should also have chains.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
- Contact:
With only 3" of snow, you shouldn't have had too many problems. Was the blade angled to slide the snow to the side instead of building up? Of course chains & weights will make a world of difference, but 3" of snow should have been fairly easy. Lots of practice will make you better. Seeing where your from, I think you will get plenty of that! .....................
Ron
- spaceghost
- 10+ Years
- Posts: 756
- Joined: Wed Jun 23, 2004 8:19 am
- Zip Code: 02346
- Tractors Owned: 1959 Cub lo-boy
1950 super A - Location: Middleboro MA usa
I just ordered some chains from the link that big dog gave.
My blade is rusty so I will have to do an emergency paint job tomorrow night after
Work.
I have new wearing shoes, and the blade did not scrap the tar clean.
I did have the blade at an angle but the snow did not slid off the blade.
I tried banging on the shoe with a hammer and that helped a little.
My blade is rusty so I will have to do an emergency paint job tomorrow night after
Work.
I have new wearing shoes, and the blade did not scrap the tar clean.
I did have the blade at an angle but the snow did not slid off the blade.
I tried banging on the shoe with a hammer and that helped a little.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Spaceghost - throw a good coat of wax on that blade after you get the surface smooth and painted. The smoother the surface, the easier the snow will slide.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- Carm
- 10+ Years
- Posts: 1085
- Joined: Thu Aug 28, 2003 2:11 pm
- Zip Code: 21234
- Tractors Owned: 1947 FCub 1948 FCub (FrankenCub), 1949 C, 1952 SA, 1963 IH 3414 Backhoe Diesel, 1960 Oliver 880 Diesel, 1945 Mack EF Fire Truck
- Circle of Safety: Y
- Location: MD, Baltimore and Freeland
- Contact:
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Never tried it but I would think you would defeat your purpose. Most bedliner sprays are intended to be non-slip and have texture in them.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- johnbron
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Aren't 16 inch tires are turf tires? I imagine the chains will help. I bought some wheel weights on E-bay. Front cub and rear cadet are the same weights. I noticed a pair last night on E-bay but felt at $102.00 they were getting pricy. I'll e-mail the guy I got them from to see if he has any more.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
- Don McCombs
- Team Cub Mentor
- Posts: 17443
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Don, from the size listed I would guess that he has a pair of the wide turf treads from a number series lo-boy.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- spaceghost
- 10+ Years
- Posts: 756
- Joined: Wed Jun 23, 2004 8:19 am
- Zip Code: 02346
- Tractors Owned: 1959 Cub lo-boy
1950 super A - Location: Middleboro MA usa
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Spaceghost, I'd have to go measure my 184's wheels against the weights but I don't think they will fit. Part of your problem is that your tires are working against you too. Not only is there no grip from turf tread but the wide tires are designed for flotation, not penetration so the weight of your tractor is spread over a larger area and the tires will spin on top of the snow rather than penetrate down to something solid where they can grip. The chains will help but a set of narrow tread tires with chains would be the best set-up.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Who is online
Users browsing this forum: Dale Finch, Gary Dotson and 39 guests