This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
"Jerky" touch control
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 371
- Joined: Mon Jun 30, 2003 9:14 pm
- Location: Ridgway,Pa
- Contact:
"Jerky" touch control
I hooked up the snow plow( front mounted) for it's winter chores and after using it today for the first time this season , I have a problem with the blade coming down in " jerks". Fluid level ok. I just can't smooth it out , raises ok. but not coming down .
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
Any thing tight, binding or bent? Did you oil or grease all the linkages. Did you let it run a while and work it a number of times to purge air and warm up the fluid. Of course check the level after the above. I athink that after pushing snow for an hour or two it will be loose as a goose.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
Who is online
Users browsing this forum: No registered users and 16 guests