This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

bottom radiator hose

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
bjgravley
10+ Years
10+ Years
Posts: 131
Joined: Wed Nov 26, 2003 9:47 pm
Location: Surry,VA

bottom radiator hose

Postby bjgravley » Fri Nov 05, 2004 10:13 pm

what is the best place to get the lower hose for the coolent pipe, does napa carry it, and also is there any tricks on how to get it on it looks like there is only about half a inch between the pipes thanks i think i have saw posts about this before, how do you pull up old post thanks alot

SPONSOR AD

Sponsor



Sponsor
 

User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Fri Nov 05, 2004 10:18 pm

Click on the search button on top, type a word or two. In your case I would type hose , radiator or radiator hose. Try 1 or the other and you will get a list of postings containing your word.
Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:

Postby Bigdog » Fri Nov 05, 2004 10:19 pm

The inlet casting from the block is removeable. You will no doubt have to replace the gasket but it is the simplest way to do the job.
Last edited by Bigdog on Fri Nov 05, 2004 10:23 pm, edited 1 time in total.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

Donny M
10+ Years
10+ Years

Postby Donny M » Fri Nov 05, 2004 10:22 pm

NAPA does have it. That's where I got mine. As for putting it on; You can either take off the inlet casting on the block or try and work a short length of hose between the nipples. The length of the hose is 2.375". It's much easier to take the casting off of the block and besides you get to make a new gasket. Too much fun :!: :!: :lol: 8)

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Postby Rudi » Fri Nov 05, 2004 10:34 pm

BJ:

Well you have yourself a fine kettle of fish. Been there, done that, don't want to do it that way again :!: :roll: :oops: :roll:

The rubber hose is:

Part # 28 on page 1 & 2 of Group 13 - TC-37F Parts Catalog.

Image
1-5/8" ID x 2-3/8" long 1 Ply Radiator Outlet

Order 2-3/8" from bulk hose part # 407 005 R1

BTW:

This hose is available in bult at any NAPA or Auto Parts Supply store. There may be a cutting fee. Make sure you do not get the stuff with the wire core - mess is fine, core is a pain in the posterior.

Next PITP is putting it on.

To replace this hose you first must remove the elbol-

Item # 26 Part # 251 430 R2 Elbow, Water Inlet

Neat thing about removing this particular part, is that you have to remove the Mag to get to it :!: :idea: :roll: :roll: :oops: :roll:

Like I said, been there done that.

Make sure when you remove the mag, that you use a grease pencil, a parts marking pen or even white out to mark the position of the mag. That way, you do not lose your timing - DON"T ASK :!: :!: :roll: :oops: :oops: :roll:

If you take your time, it really isn't all that difficult. Just pay attention to where the mag is positioned.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Arizona Mike
Cub Pro
Cub Pro
Posts: 1952
Joined: Tue Mar 11, 2003 9:16 pm
Zip Code: 85615
Tractors Owned: 6 Cubs and no mas.

1947 Circle series Farmall Cub with Armstrong lift, belt pulley, 5"rims 6" tires, SN 563

1949 Farmall Cub with high crop option and hydraulics

1955 Farmall Cub with fast hitch

1955 International Cub Loboy with fast hitch

1957 Farmall Cub with fast hitch

1959 Farmall Cub with fast hitch
Location: way high up in the Huachuca Mt. at the bottom of a deep dark canyon

Postby Arizona Mike » Fri Nov 05, 2004 11:37 pm

The manual calls for a 1 ply rubber hose. Can't get these at my NAPA, but they're available from OEM. I used the 1 ply hose. Its a little thinner and also enables you to use the existing Wittek clamps...if you got 'em.

Mike


Return to “Farmall Cub”

Who is online

Users browsing this forum: jobbyjim and 29 guests