This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Ammeter and 4 Position Switch

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:
Contact Bigdog

Postby Bigdog » Thu Nov 04, 2004 4:53 pm

Donny M wrote:Bigdog,
If you're refering to a "Cowboy" bubble bath :!: :lol: :lol:
That's nothing to be :oops: :oops: about :!: :lol: :!: 8)


Is that like a "Texas jacuzzi"? :D :D
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3544
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Thu Nov 04, 2004 5:11 pm

"Before I know it, I'll be in the "501" club".

I'm a member and didn't even know it. :oops: From the looks of it, I have the fewest posts of all members.
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman
Top
User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Thu Nov 04, 2004 5:32 pm

Where are they serving the ham bisquits?
Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
Top
Donny M
10+ Years
10+ Years

Postby Donny M » Thu Nov 04, 2004 5:41 pm

1.03
The dielectric constant of methane gas :!: Put dat in your book :lol: :lol: :lol: 8)
Top
Cub-Bud
Team Cub Guide
Team Cub Guide
Posts: 3544
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Tractors Owned: Four FCUBs, one IH Lo-Boy, one B Farmall, two Cadets, and a John Deere B.
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Thu Nov 04, 2004 6:25 pm

"Where are they serving the ham bisquits?


Jim Hudson's table :!:

http://www.gweep.net/~leaf/album/objects/biscuits_6871.jpg
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman
Top
User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Thu Nov 04, 2004 6:28 pm

Jim could you e-mail me a couple of them?
Thanks Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
Top
Jim Becker
Team Cub
Team Cub
Posts: 17278
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Thu Nov 04, 2004 11:18 pm

Donny M wrote:My point is why would you want to decrease the efficiency of the contacts however small :?:


This discussion has been focusing on what happens when the switch is on. It is just as important to consider when it is off.

A non-dielectric grease will contribute to leakage, either through the circuit or to ground. Even dielectric grease will do it after it gets enough contamination, but the other grease is worse.

My experience has been leakage is as big a problem as poor contact has been. I have used both types of grease on switches. Given both aspects, I generally prefer dielectric grease. Note that I said generally. Just today I was working on something with a couple big slip rings and used Lubriplate.
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: Flemmingth and 52 guests