Good
Russ has something to help get the starter running. After that we will continue on getting the wiring working.
Bill
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Confused with new wire harness hookups Please help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
-
- Team Cub
- Posts: 17241
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Debugging my starting/light switch problem
Galen wrote:Can anyone tell me where the two wires from the fuse go? . . . Do the orange and light green wires connect to the ignition switch (a keyed one in my case).
These questions were covered in your first thread on this subject.
http://www.farmallcub.com/phpBB2/viewtopic.php?t=5157&highlight=