Thanks to you experts, my Cub project is going great. The next two items are fluid changes.
Oil change with filter job should be real easy.
Anything out of the ordinary should I watch for?
Next, the coolant change. I know to mix fluid with water before adding. But do I just remove the plug at bottom of the radiator, letting it drain?
What about the fluid in the block? Anthing out of the ordinary here?
I don't want to miss anything.
Thanks in advance.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Coolant Change
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 40
- Joined: Fri Sep 24, 2004 8:26 pm
- Location: Prospect, Kentucky
Coolant Change
There is no substitue for good marksmanship.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
If it hasn't been changed for a while (oil), there is usually some sludge in the bottom of the oil filter drain pipe. Other than that, it is a straightforward procedure.
The drain plug on the radiator casting is the low point of the system. Everything will drain from there. If you see a lot of deposits or crud (technical term), flush with clear water before re-filling.
The drain plug on the radiator casting is the low point of the system. Everything will drain from there. If you see a lot of deposits or crud (technical term), flush with clear water before re-filling.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 40
- Joined: Fri Sep 24, 2004 8:26 pm
- Location: Prospect, Kentucky
-
- Similar Topics
- Replies
- Views
- Last post
-
- 16
- 716
-
by Clemsonfor
Sat Jun 11, 2022 12:39 pm
-
- 6
- 293
-
by Eugene
Tue Aug 17, 2021 8:19 pm
-
-
Cub coolant leak and head bolt locations
by workingfarmcub » Sat Jan 15, 2022 10:46 am » in Farmall Cub - 14
- 570
-
by workingfarmcub
Mon Apr 25, 2022 8:17 am
-
-
-
Cub coolant drain on right side of engine question. Attachment(s)
by Board shortener Tom » Thu Jul 27, 2023 11:50 am » in Farmall Cub - 15
- 334
-
by Board shortener Tom
Sat Jul 29, 2023 10:11 am
-
-
-
2 gaskets only 1 place on coolant pipe from head
by pett3227b » Thu Dec 14, 2023 9:52 am » in Farmall Cub - 2
- 798
-
by Dale Finch
Fri Dec 15, 2023 8:39 am
-
Who is online
Users browsing this forum: No registered users and 4 guests